| Author |
 Topic Search  Topic Options
|
jturano11 
Bronze Level
Joined: 26 Mar 2010
Location: Pennsylvania
Points: 34
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: hd5
Posted: 28 Dec 2015 at 1:55pm |
|
I hear I can replace track adjusters on my hd5 with hyd ones,anyone know where to order them or anything about it?
Thanx
|
 |
|
Sponsored Links
|
|
|
CAL(KS)
Orange Level
Joined: 18 Sep 2009
Location: Chapman, KS
Points: 3804
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Dec 2015 at 9:33am |
look here
they also mfg new sprocket rings
|
|
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
|
jturano11
Bronze Level
Joined: 26 Mar 2010
Location: Pennsylvania
Points: 34
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Dec 2015 at 12:24am |
|
Awsome,can't thank you enough.while I go the tracks apart I'll have to fix a final drive leak.any ideas of where to buy the seals?
|
|
jturano11
Bronze Level
Joined: 26 Mar 2010
Location: Pennsylvania
Points: 34
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Dec 2015 at 12:29am |
|
I can tell just by the looks of things it's going to be a not so easy job I'll have to post something for some advice I never replaced these seals before I keep losing oil from left side.
|
|
CAL(KS)
Orange Level
Joined: 18 Sep 2009
Location: Chapman, KS
Points: 3804
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Dec 2015 at 8:31am |
if anyone has the parts new http://www.minnpar.com will. otherwise you may have to get good used. can also view parts books on their site
|
|
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
|
gemdozer
Orange Level
Joined: 17 Sep 2009
Points: 1066
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Dec 2015 at 11:17am |
|
I have some new ring seals and boots ass for outboard bearing and should have some boot ass spring for the rear sprocket
|
|
gemdozer
Orange Level
Joined: 17 Sep 2009
Points: 1066
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Dec 2015 at 1:57pm |
|
Before removed the track for changing the seals make sure the big nut on sprocket shaft is't loose
|
|
Coke-in-MN
Orange Level Access
Joined: 12 Sep 2009
Location: Afton MN
Points: 42018
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Dec 2015 at 3:50pm |
to change the seals you will need to drop truck frame from machine as well as disassemble outboard bearing on the truck frame that supports the axle shaft . Some work is involved in the full process - check archived posts in this section for info .
|
|
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.
|
|
