| Author |
 Topic Search  Topic Options
|
Mikez 
Orange Level Access
Joined: 16 Jan 2013
Location: Usa
Points: 8735
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Transport rod
Posted: 01 May 2020 at 8:56pm |
Hello everyone. Have what I think is the mower transport Rod. The older pitman mowers. Could some one measure there's. When I looked in parts book I see four different part numbers for it. The one we have is about 42" long X 5/8" Rod dia X 7/16 thread dia with like a 45deg bend at thread end. I didn't add the threaded part to the 42".  Thanks
Edited by Mikez - 02 May 2020 at 8:09pm
|
 |
|
Sponsored Links
|
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8652
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 May 2020 at 10:17am |
|
sure looks like the ol #3
|
|
NE GA Allis
Bronze Level
Joined: 17 Feb 2019
Location: Georgia
Points: 139
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 May 2020 at 10:19am |
|
I’ll see if I can find the one we had but can’t remember if it was for number 3 or 5.
|
|
Keeping Allis alive with:
2 B’s, 1 C, 6 CA’s, 2 WD’s,
1 WD45, 3 D15D’s, 1 D17
|
|
NE GA Allis
Bronze Level
Joined: 17 Feb 2019
Location: Georgia
Points: 139
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 May 2020 at 12:29pm |
|
Definitely not for a number 3 mower. If you look at Agco parts books for the no. 3 mower on the “main frame” section, you can see that the prop rod also has like a 20 degree bend at the 90 degree end of the rod to clear the hydraulic cylinder. I verified on my no. 3, it needs that 3rd bend.
I measured a prop rod on what I believe is a b and c belly mower and it is about the same length as what you measured.
I am not sure what all the differences are between the no. 5 mower and the b and c belly mower but visually by the parts books, it looks like the frame for the b and c mower is longer than the no. 5 mower. The front brackets on the no. 5 mower that attach to the tractor are angled forward and the bend straight up to bolt to the tractor. The b and c mower brackets only go straight up and down between the mower and the torque tube. Like I said, I’m not sure if those are the only differences but by looking at the parts books, I would imagine that the prop rod for the no. 5 mower and b and c mower are pretty close. The frames look about the same.
Hopefully someone else can verify this.
|
|
Keeping Allis alive with:
2 B’s, 1 C, 6 CA’s, 2 WD’s,
1 WD45, 3 D15D’s, 1 D17
|
|
Mikez
Orange Level Access
Joined: 16 Jan 2013
Location: Usa
Points: 8735
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 May 2020 at 7:15pm |
|
Thanks.
Like even said, it looks like the #3 has another slight bend in it.
The #5 mower is 803571
The WC mower is 802961
The B-IND is. 802391
The B,B-C mower is 802706
The B-C eff Jan 1941 is 802154
All these are in mower parts book that might look like what I have, if anybody has one they could measure quick for me. Thanks a bunch for the help.
|
|
Roger Mn
Bronze Level
Joined: 12 Sep 2009
Location: Preston Mn
Points: 108
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 May 2020 at 7:29pm |
|
my transport rod for WC is about 42 inches
my number 3 rod is about 45 inches
|
|
Mikez
Orange Level Access
Joined: 16 Jan 2013
Location: Usa
Points: 8735
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 May 2020 at 8:06pm |
|
Great thanks roger. I didn't mention that I measured from hook end up to about the bend, I didn't add in the threaded part
|
|
