70 series 4 bottom plow

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Mikez sounds like we are both thinking the same thing, without the book I dont know the correct part names. I can see if the plow is not level while in the furrow, and its tilted to the right, the shares would be tilted away from the ground preventing them from digging in. Tilt to the left to level the plow and hopefully she will dig in. Sounds logical.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
AC720Man Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 10 Oct 2016 Location: Shenandoah, Va Points: 5238	Post Options Post Reply Quote AC720Man Report Post Thanks(0) Quote Reply Posted: 20 Apr 2017 at 9:08pm
	Mikez sounds like we are both thinking the same thing, without the book I dont know the correct part names. I can see if the plow is not level while in the furrow, and its tilted to the right, the shares would be tilted away from the ground preventing them from digging in. Tilt to the left to level the plow and hopefully she will dig in. Sounds logical.
	1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD

Sponsored Links

TedBuiskerN.IL. Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Davis, IL. Points: 1959	Post Options Post Reply Quote TedBuiskerN.IL. Report Post Thanks(0) Quote Reply Posted: 22 Apr 2017 at 7:18am
	Could the tail wheel be too large? Looks like if it went down any further it would rub the frame. I have that same plow, but the snap coupler version, and have no trouble with it going to proper depth. Can be seen it action on you tube /Mattpehl
	Most problems can be solved with the proper application of high explosives.

Clay Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Udall, Kansas Points: 9900	Post Options Post Reply Quote Clay Report Post Thanks(0) Quote Reply Posted: 22 Apr 2017 at 8:22am
	If you have a long level piece of concrete, it is fairly easy to set a plow before you go to the field. Determine the depth you desire. Lower the plow. Place blocks, which are the same thickness as the desired depth, under the left rear tractor wheel. Lower the plow. Place a board, equal thickness to the height of the point, to level the shear. Adjust the hitch to a level position (side to side and front to rear). A carpenter level works nicely. Adjust the gauge wheel to the desired depth. Edited by Clay - 22 Apr 2017 at 8:42am