D10 Series 3 Restoration

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Guys, I am putting the 3-point on my D10 back together and I am stumped on something and I am hoping you can help. Before I sent the threaded 3-point adjustment assembly to sand-blasting I unscrewed it as far as it would go but the male part (green arrow) never actually came out of the female part(red arrow). It simply became loose and I did not try to force it out instead I opted to send it to blasting as is. 

Now it has been blasted, primed and painted and ready to go back on but it simply won't thread on. I can take the female piece and slide it a long ways up the male piece making me think the threads are stripped out. This is true on both sets of these adjustment arms. Is there some type of floating nut in these things? How could both strip out on me at the same time? 

One last question is what is the roll pin (blue arrow) for? That makes no sense (to me at least) to put a pin through a threaded rod. 

What am I missing guys?

Thanks for the help,

Jeff

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Jeff K Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 15 Oct 2015 Location: Michigan Points: 202	Post Options Post Reply Quote Jeff K Report Post Thanks(0) Quote Reply Topic: D10 Series 3 Restoration Posted: 27 Feb 2016 at 2:24pm
	Guys, I am putting the 3-point on my D10 back together and I am stumped on something and I am hoping you can help. Before I sent the threaded 3-point adjustment assembly to sand-blasting I unscrewed it as far as it would go but the male part (green arrow) never actually came out of the female part(red arrow). It simply became loose and I did not try to force it out instead I opted to send it to blasting as is. Now it has been blasted, primed and painted and ready to go back on but it simply won't thread on. I can take the female piece and slide it a long ways up the male piece making me think the threads are stripped out. This is true on both sets of these adjustment arms. Is there some type of floating nut in these things? How could both strip out on me at the same time? One last question is what is the roll pin (blue arrow) for? That makes no sense (to me at least) to put a pin through a threaded rod. What am I missing guys? Thanks for the help, Jeff

Sponsored Links