| Author |
 Topic Search  Topic Options
|
Wes (VA) 
Orange Level
Joined: 12 Sep 2009
Location: Elkton, VA
Points: 510
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Roosa inlet pressure...
Posted: 13 Mar 2012 at 9:43pm |
|
If they've got too much inlet pressure from an electric pump..what will that do to the inj. timing? on a 7080 that didn't come out with electric pump. thanks, -Wes
|
 |
|
Sponsored Links
|
|
|
MACK
Orange Level
Joined: 17 Nov 2009
Points: 7664
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2012 at 10:17pm |
|
It will advance timing at cranking speed and make it harder to start. Could make it knock at idle. Advance screw can be adjusted for the pressure. MACK
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 5096
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2012 at 6:32am |
|
what pump are you running, & how much pressure is it rated at?
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
Wes (VA)
Orange Level
Joined: 12 Sep 2009
Location: Elkton, VA
Points: 510
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2012 at 8:10am |
|
Ed, its got a carter pump of somekind..didn't think to try and put a gauge after and see what its puttin' out. I'll see if I can do that today and see what I've got. Mack, it sounds like I may be on to somethin' here then.
|
|
Wes (VA)
Orange Level
Joined: 12 Sep 2009
Location: Elkton, VA
Points: 510
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2012 at 12:19pm |
|
I'm gettin' 4.5-5 psi off the electric pump.. seems like I saw somewhere thats ok pressure..right?
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 5096
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2012 at 2:39pm |
|
that won't hurt a thing. When calibrating roosa pumps we typically supply pump with 3-5 psi from test stand, per Stanadyne specs.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
Wes (VA)
Orange Level
Joined: 12 Sep 2009
Location: Elkton, VA
Points: 510
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2012 at 4:28pm |
|
Ok thanks, guess I'll keep checkin'..I haven't run new lines from the tank (to try and eliminate air)..they look like they've been on there a while. Though someone has put a hose from the block type filter to the inj pump, and it has a loop that runs about 4" above the fuel filter level, then back down to the inj. pump. im wondering if air isn't gettin' trapped in the top of that loop, but with the electric pump..it ought to push it through. Probably just need to pull the pump and send it off.
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 5096
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2012 at 4:33pm |
|
I guess I missed what your problem / complaint is? Need more history about what the symptoms are.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
