| Author |
 Topic Search  Topic Options
|
brad7066 
Bronze Level
Joined: 13 Mar 2022
Location: wisconsin
Points: 40
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 190 bull gears making lighter
Posted: 28 Mar 2022 at 7:17pm |
|
I want to drill holes in my bull gears to loose some weight. Is there a certain way it should be done. How many holes can I drill. 1/2 inch drill bit?
|
 |
|
Sponsored Links
|
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8225
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Mar 2022 at 7:51pm |
|
Dang, curious on how much weight you need to lose? I know it can be a close deal -
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 84976
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Mar 2022 at 7:59pm |
|
steel weighs .28 pounds per cubic inch ... going to take a lot of holes to gain any weight !! ..... thats a 1/2 inch hole about 5 inches deep to get .28 pounds !
|
|
Like them all, but love the "B"s.
|
|
WF owner
Orange Level
Joined: 12 May 2013
Location: Bombay NY
Points: 4847
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2022 at 6:59am |
It sounds like a lot of work to save very little weight and there is a possibility of compromising the strength of the gears. There may be a lot of easier places to save weight.
A guy I knew several years ago, that drove one of those green and yellow tractors, had a small motorcycle battery in the tractor. He had a welder plug setup to start it with a remote battery. (I think the motorcycle battery was to run the water injection.)
A local guy (on here sometimes) has a lot of aluminum on his 200.
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 8130
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2022 at 10:03am |
Ive seen some pretty big holes in the two poppers gears, looked like 5 inch holes to me. Look at some of the rims they butcher, hardly any thing left.
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
brad7066
Bronze Level
Joined: 13 Mar 2022
Location: wisconsin
Points: 40
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2022 at 1:50pm |
|
a guy i was talking to on facebook sent me pictures of his he was able to loose 40 pounds. trying to pull 6500 it is at 6200 with no one on the seat. not sure if it will be drivable with a 100 lbs on the front. i have cut most of the extra cast off already. cut axles short with weld on hubs. my only options are aluminum rims with i cant afford at the time or lighten something else. thanks for all the comments
|
|
brad7066
Bronze Level
Joined: 13 Mar 2022
Location: wisconsin
Points: 40
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2022 at 1:52pm |
|
it is very close doug aluminum rims are my only other option. i cant afford 4500 bucks right now for that looking for other options
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4906
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2022 at 6:34pm |
My Oliver has about 3 or 4 inch holes already in the bull gears I think it's 4 of them. If the gear was solid you could have easily made it 6 holes and still had plenty of meat between the holes. Maybe the weight in the seat would be the easiest to loose with a lighter driver. That's what garden tractor pullers do, just change drivers for the heavier class. Try checking the weight on different tires. I've seen as much as 100 pounds difference with the same size tire on larger size tires |
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 84976
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2022 at 8:48pm |
a guy i was talking to on facebook sent me pictures of his he was able to loose 40 pounds.
Brad... if your able to post a picture, that would be interesting !
|
|
Like them all, but love the "B"s.
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 84976
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2022 at 8:52pm |
|
if your making 4 inch diameter holes, then every 1/4 inch deep is 1 pound.
|
|
Like them all, but love the "B"s.
|
|
brad7066
Bronze Level
Joined: 13 Mar 2022
Location: wisconsin
Points: 40
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Mar 2022 at 12:17am |
|
will post pictures when done
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8411
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Apr 2022 at 1:00pm |
|
a good bowel movement before the pull would likely loose as much weight
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 8130
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Apr 2022 at 1:55pm |
 SteveM C/IL wrote:
a good bowel movement before the pull would likely loose as much weight |
There is a good one??????
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
HudCo
Orange Level
Joined: 29 Jan 2013
Location: Plymouth Utah
Points: 3732
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Apr 2022 at 11:03pm |
|
thats about what i was going to say , just miss lunch twice in a row , but its like building mod snowmobiles it takes alot to loose 5 or 10 lbs.
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 8130
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Apr 2022 at 9:20am |
HudCo wrote:
thats about what i was going to say , just miss lunch twice in a row , but its like building mod snowmobiles it takes alot to loose 5 or 10 lbs. |
Love fast snowmobiles!!!!!!!!
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
MACK
Orange Level
Joined: 17 Nov 2009
Points: 7664
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Apr 2022 at 10:27pm |
|
Foam rear end and run less oil, sealed bearings in torque tube without any oil. 190 rear end with smaller bull gears and smaller axels. Use alot of aluminum. MACK
|
|
brad7066
Bronze Level
Joined: 13 Mar 2022
Location: wisconsin
Points: 40
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Apr 2022 at 2:36pm |
|
yes thats what im doing small bull gear and small axles. to every one on taking a crap im up to 48 lbs on the rear end housing and 21lbs on the bull gears if you guys can crap that much you should go the dr
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 84976
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Apr 2022 at 9:37pm |
48 lbs on the rear end housing and 21lbs on the bull gears .........
WOW... i would never have guessed you could get that out ! 
|
|
Like them all, but love the "B"s.
|
|
