| Author |
 Topic Search  Topic Options
|
Steve(SEMN) 
Orange Level
Joined: 12 Sep 2009
Location: Rochester, MN
Points: 836
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D14 power steering wheels
Posted: 20 Feb 2011 at 4:22pm |
|
I have a 1958 d14 that did not have factory power steering. I added power steering to it and was wondering if a factory power steering wheel (the one with the emblem) would fit. Are there other models that would work too.
|
 |
|
Sponsored Links
|
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 23685
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Feb 2011 at 5:02pm |
Hmm... both my non-power steering D-14s have a cast A-C emblem on the wheel, held in by two screws at 9 and 3 o'clock.
Do the p-s units have a special emblem ?
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21050
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Feb 2011 at 5:18pm |
|
The early steering wheels fit just like a WD45....round 7/8" diameter shaft with a solid pin driven in thru the hub to hold it. The later steering wheels with the diamond shaped cover had a threaded/splined shaft to retain the steering wheel. If you changed the shaft you could upgrade the steer wheel.
|
|
Calvin Schmidt
Orange Level
Joined: 11 Sep 2009
Location: Ontario Can.
Points: 4526
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Feb 2011 at 7:59pm |
|
The black bar grill tractors with the splined steering wheel had a diamond logo in the center that said POWER STEERING if so equiped and the A-C diamond logo with regular steering.
|
|
Nothing is impossible if it is properly financed
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7393
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Feb 2011 at 11:40pm |
Jay, here is the emblem. As DrAllis and Calvin mention, the 1959 has a different steering wheel that is splined. Earlier ones had a pin that held the wheel to the shaft.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
