| Author |
 Topic Search  Topic Options
|
Ewhitford 
Bronze Level
Joined: 29 Apr 2018
Location: Mason MI
Points: 30
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: B112 questions
Posted: 09 Mar 2020 at 12:06pm |
I have a b112 with a 16hpBriggs in it with a 1inch shaft for the crank. What size in diameter should be used to power front attachments ? 2nd question, I have no power to pull my garden trailer espesially going up hill. I tried several belts, Watched the drive system and nothing seems to be slipping so what am I missing. I have this issue whenever going up a hill or towing our sprayer, wagon or spreader.
Thank you.
|
 |
|
Sponsored Links
|
|
|
Mikez
Orange Level Access
Joined: 16 Jan 2013
Location: Usa
Points: 8501
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Mar 2020 at 8:29pm |
|
Is it a variable speed
|
|
tadams(OH)
Orange Level Access
Joined: 17 Sep 2009
Location: Jeromesville, O
Points: 10422
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Mar 2020 at 2:53pm |
|
Check the pulley on the rear, mine throughs the out every so often, can't keep set screw tight.
Edited by tadams(OH) - 10 Mar 2020 at 2:54pm
|
|
HudCo
Orange Level
Joined: 29 Jan 2013
Location: Plymouth Utah
Points: 3667
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Mar 2020 at 9:31am |
|
you cant beat that modal 32 briggs for power, shaft is 1 inch for the snow blower if the 16 has low power make sure somone has not put a flywheel on with the wrong ploarity i have seen done and it still runs but very poorly
|
|
ACmowerguy
Orange Level
Joined: 20 Apr 2010
Location: Winfield, MO
Points: 1210
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Mar 2020 at 9:49pm |
|
Have you gone through the adjustments for the variable speed system in the service manual? These need to be adjusted periodically as the belt and linkages wear.
|
|
10 various B-series garden tractors, AC Homesteader8, 416 hydro,710 gt, 914, 916H, 917H, 920D, and many misc attachments
|
|
Animal Cracker
Orange Level Access
Joined: 01 Jul 2018
Location: Cen ny
Points: 4186
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Mar 2020 at 4:21pm |
|
You know its suppose to be a 12 hp right.
|
|
Orangeisgreat190
Bronze Level
Joined: 07 Apr 2020
Location: Ohio
Points: 50
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Apr 2020 at 10:31am |
|
I have a B112 with variable speed. Try taking you heel and pulling back toward you on clutch pedal. See if this helps. If it does, I would say ACmowerguy is right, check all rearend adjustments in manual. Also, I replaced the belt on mine and it helped tremendously. The pulleys move in and out to change diameter for speed change. This really wears on the side of the belt.
|
|
Orangeisgreat190
Bronze Level
Joined: 07 Apr 2020
Location: Ohio
Points: 50
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Apr 2020 at 10:32am |
|
Forgot to mention, check clutch return spring as well. It could be weak.
|
|
