| Author |
 Topic Search  Topic Options
|
Armand(AZ) 
Orange Level Access
Joined: 11 Sep 2009
Location: Mesa, AZ
Points: 858
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 220FWA and 3000 Series Plow - Model
Posted: 04 Dec 2010 at 9:03pm |
Thought you guys might like to see a couple pictures of my 1/16th 220FWA and 3000 Series On-Land 8BTM plow that I just finished. I have had the photo of the real machines that someone posted here a few months ago as my screensaver so decided to build a model of the set. I modified the 220 by scratchbuilding the frontend so the cylinder works when the wheels are turned. Then build the hitch and 3PT, turned the weights and front rims and hubs, and upgraded the operators station with levers and pedels. Then scratch built the plow from pictures and measurements taken this summer. Thanks to Jim Lunneborg for the loan of a manual on this plow which was a great help during the build. The plow is all brass. I hoped to build the unit with reset moldboards but too many parts, and once it is painted things don't move well anyhow. So I settled on the shear bolt moldboards. Hope you enjoy the pictures. More on my website at acmodelsofarizona.weebly.com. Thanks!! Armand
|
 |
|
Sponsored Links
|
|
|
omahagreg
Orange Level Access
Joined: 11 Sep 2009
Location: Omaha, Nebraska
Points: 2806
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Dec 2010 at 9:05pm |
|
Awesome!
|
|
Greg Kroeker
1950 WD with wide front and Freeman trip loader
|
|
rrhead(SD)
Silver Level
Joined: 11 Sep 2009
Location: Canton, SD
Points: 432
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Dec 2010 at 9:22pm |
|
Always the best! Thanks for showing. rrhead(SD)
|
|
AllisChalmers37
Orange Level
Joined: 11 Jul 2010
Location: London,KY
Points: 1846
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Dec 2010 at 9:26pm |
|
|
|
1937 WC, 1950 CA, 1959 D14, 1967 190XT, 2006 Ram 3500
|
|
cougar766
Silver Level
Joined: 15 Sep 2009
Location: Amo, Indiana
Points: 150
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Dec 2010 at 9:31pm |
|
job very well done,,,, thank you for sharing
|
|
jiminnd
Orange Level
Joined: 16 Sep 2009
Location: Rutland ND
Points: 2247
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Dec 2010 at 9:42pm |
|
Glad it worked out for you, I got my book back yesterday, if there are any others you may need I have a bunch in that vintage, bought at a dealer sale, mid 60s and into 70s, good looking setup.
|
|
JCinPA
Silver Level
Joined: 12 Sep 2009
Location: Turbotville,Pa.
Points: 75
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Dec 2010 at 9:44pm |
Armand you do awsome work! Thanks for the pictures. JCinPA
|
|
Unit3
Orange Level
Joined: 17 Oct 2009
Location: NC Iowa
Points: 5559
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Dec 2010 at 11:15pm |
|
Great job! Wow!
|
|
427435
Orange Level
Joined: 18 Nov 2010
Location: SE Minnesota
Points: 18637
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Dec 2010 at 11:22pm |
|
Way cool!!!
|
|
Mark
B10 Allis, 917 Allis, 7116 Simplicity, 7790 Simplicity Diesel,
GTH-L Simplicity
Ignorance is curable-----stupidity is not.
|
|
Calvin Schmidt
Orange Level
Joined: 11 Sep 2009
Location: Ontario Can.
Points: 4526
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 6:37am |
|
WHAT A GUY !!! Armand, I have 450 operators manuals in my collection. I can help with your next project!! LOL! Another great job!!!! I hope to buy a real plow like that for my 220 at an auction next April.
|
|
Nothing is impossible if it is properly financed
|
|
DarrylinWA
Orange Level
Joined: 12 Sep 2009
Location: Amarillo Texas
Points: 1900
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 6:47am |
Armand
Another masterpiece!!!!!!
Great job again,
Take care, Darryl
|
|
B 10 Custom. Serial # 1001 D21, First D21 built 69 #4498 and Last D 21 Built #4609. 1946 MM UTU. And 2000, 2005 Pete's. AC custom Hauling.
|
|
Leon B MO
Orange Level
Joined: 12 Sep 2009
Location: Old Monroe, Mo
Points: 2135
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 7:27am |
That's impressive.
Thanks for sharing.
What a talent.
Leon B MO
|
|
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
|
Jim Lindemood
Orange Level
Joined: 22 Sep 2009
Location: Dry Ridge, KY
Points: 2569
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 7:51am |
|
Really nice --- you just amaze me with the stuff you can build!!
|
|
TomMN
Orange Level
Joined: 13 Sep 2009
Location: Elbow Lake, MN
Points: 858
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 7:56am |
|
Wow! Thanks for sharing. Tom
|
|
michaelwis
Orange Level
Joined: 12 Sep 2009
Location: Wi
Points: 8765
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 8:42am |
|
Awesome .. wish i could have stopped by and seen you last winter..when i was in town
|
|
WD WD45 DIESEL D 14 D-15 SERIES 2 190XT TERRA TIGER ac allcrop 60 GLEANER F 6060 7040.and attachments for all Proud to be an active farmer
|
|
AndrewGubbels
Orange Level
Joined: 12 Sep 2009
Location: nebraska
Points: 1501
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 8:44am |
|
Armand!!! That is so awesome. I wish you were my neighbor!! I would be over there more then likely every day at least twice to look at the wonderful work you do. I am always looking forward to your next project.
Thank you for sharing!
Andrew Gubbels
|
|
Andrew Gubbels
Gubbels Restoration
|
|
JoeO(CMO)
Orange Level
Joined: 11 Sep 2009
Location: Cent Missouri
Points: 2694
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 8:45am |
|
Really nice! I like it! ...3 weeks! ....that would take me 3 decades at the rate I've been getting things done! Thanks for sharing.
|
|
|
|
BurtIA
Silver Level
Joined: 27 Nov 2009
Location: Amana, IA
Points: 121
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 9:03am |
Armand, as usual, very nice and way high on the coolness meter! We had a little snow, I'm sure you're missing that.
Burt
|
|
Dutchboy Johan
Orange Level
Joined: 14 Sep 2009
Location: Netherlands
Points: 571
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 9:40am |
|
Unbelievable how you can made such models. Deep respect for you Armand. Very detailed.
|
|
---> Better by Design <---
Johan Straver, Almkerk/ Netherlands
Allis-Chalmers 190XT Ser.III #26829XTD
|
|
tomdavison
Bronze Level
Joined: 03 May 2010
Location: Canton, PA
Points: 49
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 10:06am |
|
Armand: Congrattions on another great job. I still do not understand how you do it. Cool here in PA this morning (20 degrees) Have a happy holiday. Tom Davison
|
|
Darrell, Jr. (MN)
Orange Level
Joined: 11 Sep 2009
Location: Arlington, MN
Points: 234
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 10:11am |
|
another great model, but did is it me or am I seeing it wrong, does the real plow only have 7 bottoms where the model has 8?
|
|
Armand(AZ)
Orange Level Access
Joined: 11 Sep 2009
Location: Mesa, AZ
Points: 858
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 10:24am |
Thanks for the comments guys!! I am not doing anything that any one of you couldn't do if you had a lot of time on your hands!! LOL I have been at it for a while so it gets easier, not to mention a shop full of the right tools.
Darrel, good eye!! I knew the real one had 7 bottoms but then I seen in the manual that it could be extended by one or two so I chose two. Armand
|
|
Amos
Orange Level
Joined: 11 Sep 2009
Location: Ontario
Points: 1318
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 10:49am |
|
The extensions that went on the 6 bottom frame, that we had anyway, were single moldboards, not two moldboards on one piece of frame. Wish I knew where that plow was (8 16") today. It was the perfect plow for the 210 my Dad had (both bought new) and now that we have another 210 we pull only have 6 16" to pull with it (usually we use our 200 as it handles it OK.
|
|
Herb(GA)
Orange Level Access
Joined: 15 Sep 2009
Location: United States
Points: 1039
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 11:31am |
|
Another great job Armand. Thanks for sharing.
|
|
Armand(AZ)
Orange Level Access
Joined: 11 Sep 2009
Location: Mesa, AZ
Points: 858
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 1:32pm |
|
Amos, I know that the 9000 series pull type plow that I built earlier showed a five bottom and could be extended to 7 by adding two sections to the frame. I sent the manual for this plow back to Jim already but also pretty sure that it showed two bottoms on one section of frame. If I am wrong, it will be known as a "prototype" as I am not going to change it. LOL Thanks for the comments!! Armand
|
|
Nate (OH)
Silver Level
Joined: 12 Sep 2009
Location: Bellevue, Ohio
Points: 216
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2010 at 11:08pm |
|
that is absolutely amazing!!
|
|
Amos
Orange Level
Joined: 11 Sep 2009
Location: Ontario
Points: 1318
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Dec 2010 at 6:45am |
|
Armand, I have a 9000 that is 6 16" as well. Dad told me one wet year he pulled a moldboard off to pull it with the 190. I have only seen a few mono frame plows in my life and two of them had "add on" moldboards and they were just single moldboards. I may be wrong about not being able to get a double moldboard option as I am no expert. If your plow is a prototype it still looks better then the real life one(s) I have around here. Great work!
|
|
Brian F(IL)
Orange Level Access
Joined: 14 Sep 2009
Location: Paxton, IL
Points: 2701
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Dec 2010 at 8:07am |
|
Armand, simply amazing. Hope to see you if you ever get back to the Midwest.
|
|
Kip-Utah
Orange Level
Joined: 14 Sep 2009
Location: Southern Utah
Points: 874
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Dec 2010 at 12:59pm |
|
Awesome job buddy!! Kip
|
|
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!
|
|
