This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
The Forum Parts and Services Unofficial Allis Store Tractor Shows Serial Numbers History
Forum Home Forum Home > Allis Chalmers > Farm Equipment
  New Posts New Posts
  FAQ FAQ  Forum Search   Events   Register Register  Login Login


AC 6080 PTO PROBLEM
 Post Reply Post Reply
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
Craig/insoh View Drop Down
Orange Level
Orange Level
Avatar

Joined: 26 Mar 2010
Location: Waverly,ohio
Points: 229 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Craig/insoh Quote  Post ReplyReply Direct Link To This Post Topic: AC 6080 PTO PROBLEM
    Posted: 22 Jun 2010 at 5:05pm
I am also having problems with the PTO on our 6080 kicking out when pulling a discbine! Does anyone know what is causing my problem? you have to idle tractor down and sometimes it takes 5 or 6 tries to get it to turn back on audible clicking noise like cards in bicycle spokes when it doesn't engage!
Back to Top
Sponsored Links


Back to Top
DrAllis View Drop Down
Orange Level Access
Orange Level Access


Joined: 12 Sep 2009
Points: 20964 		Post Options Post Options   Thanks (0) Thanks(0)   Quote DrAllis Quote  Post ReplyReply Direct Link To This Post Posted: 22 Jun 2010 at 6:43pm
If it's the shifter to the left of the seat, the splines are possibly burred on the shaft from grinding it in gear over the years. Must remove cover under the platform and dress up the splines to insure full engagement. The problem is lack of full engaement....could also be a bent lever?? under the platform??
Back to Top
kev/ont View Drop Down
Orange Level
Orange Level


Joined: 12 Sep 2009
Location: Castleton Ont
Points: 282 		Post Options Post Options   Thanks (0) Thanks(0)   Quote kev/ont Quote  Post ReplyReply Direct Link To This Post Posted: 22 Jun 2010 at 8:54pm
I know it's a long shot but we used to get into troubles with a 6080 with the factory cab on it. The cab mount's would wear quite regular and one of the tell tale sign's used to be that the pto would not engage all the way. They finally put a set of the open station mount's in there place and was never a porblem again.
Back to Top
Amos View Drop Down
Orange Level
Orange Level


Joined: 11 Sep 2009
Location: Ontario
Points: 1318 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Amos Quote  Post ReplyReply Direct Link To This Post Posted: 23 Jun 2010 at 10:05pm
I had the pin that holds the lever on the shaft sticking out the side of the transmission partly shear off and was only engaging the collar a little on mine.  Moved the detent hole in the plate over to allow the collar to slide further.  Worked great for about 4 years until the pin sheared off completely and then I had to move the detent hole back to where it had been!
Back to Top
Craig/insoh View Drop Down
Orange Level
Orange Level
Avatar

Joined: 26 Mar 2010
Location: Waverly,ohio
Points: 229 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Craig/insoh Quote  Post ReplyReply Direct Link To This Post Posted: 24 Jun 2010 at 4:17pm
Thanks guys for your valuable input will update on what i find been under the weather this week!
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.10
Copyright ©2001-2017 Web Wiz Ltd.

This page was generated in 0.047 seconds.


Help Support the
Unofficial Allis Forum