Questions on 170 brake replacement

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Anyone ever replace brakes on a 170? Will the the axel support casting clear the lift cyd.and hose or do I have to remove the cyd.? To me it looks like it will not come out with the cyd in place. For 3 days I have tried to remove the pin with Kroil,Big hammer Heat and an Air chisel with no luck. This pin needs no retainer clips! I even tried to center punch it to drill it out and that pin is Hard! Any other suggestions as I have a brake that is froze up and has a broken activator rod. EVERY THING on tractor is Rusty and Frozen in Place!

Kurt 

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
KurtDE Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 19 Sep 2009 Location: Hilton New York Points: 81	Post Options Post Reply Quote KurtDE Report Post Thanks(0) Quote Reply Topic: Questions on 170 brake replacement Posted: 10 May 2010 at 8:08pm
	Anyone ever replace brakes on a 170? Will the the axel support casting clear the lift cyd.and hose or do I have to remove the cyd.? To me it looks like it will not come out with the cyd in place. For 3 days I have tried to remove the pin with Kroil,Big hammer Heat and an Air chisel with no luck. This pin needs no retainer clips! I even tried to center punch it to drill it out and that pin is Hard! Any other suggestions as I have a brake that is froze up and has a broken activator rod. EVERY THING on tractor is Rusty and Frozen in Place! Kurt

Sponsored Links

DrAllis Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Points: 20937	Post Options Post Reply Quote DrAllis Report Post Thanks(0) Quote Reply Posted: 10 May 2010 at 8:21pm
	Drive out the pin at the lift arm and drop the cylinder down as far as it will go. Remove the hose and the elbow fitting from the cylinder barrel. The axle WILL clear (barely).