Model C Hydraulics/Woods Mower

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Got a few questions regarding a Model C with Woods mower.   The hold position on the pump does not hold.  It creaps down within minutes, I have tightened the packing nut on the hydraulic ram which has not helped.  I am familiar with the CA/WD style pumps but am unfamilar with this style of pump.  Does somebody have a picture of this pump and some tips to share.  Is this a self priming pump?  Where is the hold valve?  How can I test a cylinder to see if it leaking?  On the CA/WD pumps there is the drain on back of the pump that I drain regular and get lots of junk out of it, is there one for the C?  Lastly, when the cylinder is raised the "triangle" of the mower hits the starter.  I have downloaded the book, but can't seem to see if there is a spacer or something I am missing.  Does somebody have a picture of this setup on a C?  

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Boomer Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 13 Sep 2009 Location: Mid Missouri Points: 102	Post Options Post Reply Quote Boomer Report Post Thanks(0) Quote Reply Topic: Model C Hydraulics/Woods Mower Posted: 15 Apr 2010 at 3:34pm
	Got a few questions regarding a Model C with Woods mower. The hold position on the pump does not hold. It creaps down within minutes, I have tightened the packing nut on the hydraulic ram which has not helped. I am familiar with the CA/WD style pumps but am unfamilar with this style of pump. Does somebody have a picture of this pump and some tips to share. Is this a self priming pump? Where is the hold valve? How can I test a cylinder to see if it leaking? On the CA/WD pumps there is the drain on back of the pump that I drain regular and get lots of junk out of it, is there one for the C? Lastly, when the cylinder is raised the "triangle" of the mower hits the starter. I have downloaded the book, but can't seem to see if there is a spacer or something I am missing. Does somebody have a picture of this setup on a C?

Sponsored Links

Dakota Dave Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 Sep 2009 Location: ND Points: 3960	Post Options Post Reply Quote Dakota Dave Report Post Thanks(0) Quote Reply Posted: 15 Apr 2010 at 3:48pm
	The Hydraulic Cylinder is a displacment type cylinder. If it is leaking it will be external. The hold control is in the pump. The rotating shaft that sticks out the right side just has a slot in it. Take the pump off its just 4 bolts and lay on the bench.carefully dissasemble and clean it out. those plugs on the top have springs and check balls the bottm plugs have check balls. get it real clean and reassemble.