This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Forsale Allis Chalmers D17 Series 4 Diesel |
Post Reply |
Author | |
Craig OH
Silver Level Joined: 25 Sep 2009 Location: Delta Ohio Points: 78 |
Post Options
Thanks(0)
Posted: 07 Dec 2009 at 8:58am |
forsale is a allis chalmers d17 series 4 diesel factory 3 point hitch the diesel engine was just overhauled by my dad that works at a agco dealer it has a brand new agco overhaul kit in it new pistions rings sleeves gaskets filters all 6 new injector tips the tractor runs good the preheater works it sat in a cold shop yesterday i preheated the engine and it started right up in 19 degree weather there is around $2,900.00 in just the engine the hi lo works good the generator does not charge and there is a small oil leak by the power steering fill cap we were going to restore this tractor but ended up buying another tractor you can email me or call me at 419-583-7659 craig
|
|
Sponsored Links | |
Craig OH
Silver Level Joined: 25 Sep 2009 Location: Delta Ohio Points: 78 |
Post Options
Thanks(0)
|
|
|
Craig OH
Silver Level Joined: 25 Sep 2009 Location: Delta Ohio Points: 78 |
Post Options
Thanks(0)
|
|
|
Craig OH
Silver Level Joined: 25 Sep 2009 Location: Delta Ohio Points: 78 |
Post Options
Thanks(0)
|
|
|
Craig OH
Silver Level Joined: 25 Sep 2009 Location: Delta Ohio Points: 78 |
Post Options
Thanks(0)
|
[TUBE]JmE8LlYSy3E[/TUBE]
|
|
Craig OH
Silver Level Joined: 25 Sep 2009 Location: Delta Ohio Points: 78 |
Post Options
Thanks(0)
|
|
|
Craig OH
Silver Level Joined: 25 Sep 2009 Location: Delta Ohio Points: 78 |
Post Options
Thanks(0)
|
also the fenders do have a couple of rust holes in them
|
|
Craig OH
Silver Level Joined: 25 Sep 2009 Location: Delta Ohio Points: 78 |
Post Options
Thanks(0)
|
$6,500.00
|
|
Nathan (SD)
Orange Level Joined: 11 Sep 2009 Location: Day County SD Points: 1262 |
Post Options
Thanks(0)
|
From the looks of the picture,5 of the sleeves don't have any standout. Head gasket problems usually follow. |
|
Brian Jasper co. Ia
Orange Level Joined: 11 Sep 2009 Location: Prairie City Ia Points: 10508 |
Post Options
Thanks(0)
|
The spec for the sleeves is flush + or - .002.
|
|
"Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford
|
|
Nathan (SD)
Orange Level Joined: 11 Sep 2009 Location: Day County SD Points: 1262 |
Post Options
Thanks(0)
|
I recut the bore ledges in a block once because of sinking sleeves. Standout was recommended at .002 per AC instructions included with the AC cutting tool. I don't remember the min or max. |
|
JP (nwOH)
Orange Level Joined: 13 Sep 2009 Location: Delta, Ohio Points: 564 |
Post Options
Thanks(0)
|
Nathan (SD) How can you see .002 from a picture ?
JP |
|
Brian Jasper co. Ia
Orange Level Joined: 11 Sep 2009 Location: Prairie City Ia Points: 10508 |
Post Options
Thanks(0)
|
I would be interested in the piston protrusion on that engine. My engine had between .050 and .060. Problem was the head gasket measured .055 compressed. It too would start easily. Didn't need any help to start into the 30's. According to the blueprints at AGCO on the 262, it should have a minimum of .0017 to a max of .029 PROTRUSION. This info was from a Technical Service Bulletin from A-C dated June of '81.
The info my machine shop has says .040 max protrusion. |
|
"Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |