This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
170 steering |
Post Reply |
Author | |
Haymaker6060
Bronze Level Joined: 07 Nov 2024 Location: Rhode Island Points: 4 |
Post Options
Thanks(0)
Posted: 07 Nov 2024 at 7:01pm |
I have a 170 that has quit steering. Got stiff butwill slightly turn wheels to the left and wheel goes hard to the right but will turn with no movement of the tires. I can pick up the front end with the loader which works fine and turn the wheels both directions but steering wheel isn’t smooth like it should be. Have changed fluid and filter with no luck and also added fluid to the Allen head fill cap under the radiator/fan. I have read what I could find about this topic but looking for some direct feedback thank you.
|
|
Sponsored Links | |
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20693 |
Post Options
Thanks(0)
|
As you describe the problem...sounds like the steering pump section has blown internal seals. The main hydraulic pump has 3 sections.
|
|
Haymaker6060
Bronze Level Joined: 07 Nov 2024 Location: Rhode Island Points: 4 |
Post Options
Thanks(0)
|
Ok thank you. I understand the pump has three sections like you said. The inner most towards the tractor for steering is that correct? And is it worth doing the full seal kit of the pump while it’s off? Seems to be the one most commonly found
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20693 |
Post Options
Thanks(0)
|
I always reseal the whole pump when I have one apart. Whichever sections output line goes to the steering orbitrol is the one to work on.
|
|
Haymaker6060
Bronze Level Joined: 07 Nov 2024 Location: Rhode Island Points: 4 |
Post Options
Thanks(0)
|
I found a very detailed description and pictures for breakdown and repair in IT shop manual. Thanks again for the information 👍🏼
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20693 |
Post Options
Thanks(0)
|
I hope you find the problem in the pump. I've never had a steering pump section ever fail on a 170, so you'd be the first.
|
|
Travis(NE)
Silver Level Joined: 24 Sep 2009 Location: Seward NE Points: 297 |
Post Options
Thanks(0)
|
It could be the seals in the steering cylinder or possibly the rack broke which would allow it to steer one way, but not the other...
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |