perkins 236 248 head bolts

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   on the diesel head bolts, what tool is used to retighten the bolts after the engine has warmed up to operating temperature? the three basic tool suppliers Snappy, Mac and Matt should have a tool to reach under the rocker arm assembly. if any one knows the the numbers of the wrench extension to go under the assembly, past or present so I would be able to look for and purchase it. If not the assembly must come off to retighten the torque on the bolts, and then reset the valves again. I have had friends to give me wrenches to go under but not all of the bolts are accessible with their tools. If multiple have to be puchased trhen multiple tools have to be purchase.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
rick ky Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 02 Oct 2009 Location: georgetown ky Points: 96	Post Options Post Reply Quote rick ky Report Post Thanks(0) Quote Reply Topic: perkins 236 248 head bolts Posted: 15 Mar 2024 at 9:53pm
	on the diesel head bolts, what tool is used to retighten the bolts after the engine has warmed up to operating temperature? the three basic tool suppliers Snappy, Mac and Matt should have a tool to reach under the rocker arm assembly. if any one knows the the numbers of the wrench extension to go under the assembly, past or present so I would be able to look for and purchase it. If not the assembly must come off to retighten the torque on the bolts, and then reset the valves again. I have had friends to give me wrenches to go under but not all of the bolts are accessible with their tools. If multiple have to be puchased trhen multiple tools have to be purchase.

Sponsored Links

Codger Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 23 Dec 2020 Location: Utopia Points: 2041	Post Options Post Reply Quote Codger Report Post Thanks(0) Quote Reply Posted: 15 Mar 2024 at 10:18pm
	Most head gaskets produced in the last 20 years or so do not require a retorque. I've rebuilt many 4.236, and 4.248 engines and have never done a retorque on any. Have always used new bolts however, and hold torque for about five seconds upon the fasteners at proper torque rating.
	That's All Folks!

rick ky Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 02 Oct 2009 Location: georgetown ky Points: 96	Post Options Post Reply Quote rick ky Report Post Thanks(0) Quote Reply Posted: 16 Mar 2024 at 7:44am
	i thought I read in technical manuals to recheck torque on head bolts new or used. my father was a airplane mechanic in pacific in wwII, helping me and my brothers over 30 years ago he always made us recheck head bolts. if I had paid more attention then, I wouldn't be asking for confirmation now. Thanks

Codger Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 23 Dec 2020 Location: Utopia Points: 2041	Post Options Post Reply Quote Codger Report Post Thanks(0) Quote Reply Posted: 16 Mar 2024 at 7:55am
	[QUOTE=rick ky]i thought I read in technical manuals to recheck torque on head bolts new or used. my father was a airplane mechanic in pacific in wwII, helping me and my brothers over 30 years ago he always made us recheck head bolts. if I had paid more attention then, I wouldn't be asking for confirmation now. Thanks [/QUOTE That procedure was quite relevant then and not a bad idea even today. In most cases however it is not required. I always use a thin lubricant on clean threads in a freshly machined block and using a calibrated torque wrench bring the fasteners to proper tension in three steps. The final torque I hold the wrench in place for about five seconds. I have a fresh 4.236 on my shop floor, and a 4.248.2 hanging on my gantry as I type this to go back into my Hyster lift truck this next week.
	That's All Folks!

steve(ill) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81424	Post Options Post Reply Quote steve(ill) Report Post Thanks(0) Quote Reply Posted: 16 Mar 2024 at 8:38am
	recheck the OUTER bolts that have easy access... That might convince you that everything is TIGHT..
	Like them all, but love the "B"s.