| Author |
 Topic Search  Topic Options
|
sinklar 
Bronze Level
Joined: 09 Nov 2010
Location: Alabama
Points: 5
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Model FPD 50-24-2PS Forklift
Posted: 09 Nov 2010 at 7:40am |
|
Just purchased a Allis Chalmers Forklift Model FPD 50-24-2PS, Serial 17209581. Specifications Pounds 4200, Center 24' Lift 168". Does anyone know the year model? Where is a good place to get a service manual for the lift. Also where is the best place to buy seals for the lift cylinders? It pulls good in reverse but slips when going forward up a 20 degree or so incline.
|
 |
|
Sponsored Links
|
|
|
towmotor tim
Bronze Level
Joined: 29 Jan 2011
Location: connecticut
Points: 8
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Jan 2011 at 1:53pm |
|
F=forklift P=Pneumatic D=diesel 50=5000 lb capacity 24=@24 inch load center 2ps=speed power shift trans. That machine is a 1960. That has the 2 spd power shift trans. Down shift it on an incline!
The packings are standard not metric so any hydraulic shop will have them. Old AC dealers can get them with a mast number.
|
|
sinklar
Bronze Level
Joined: 09 Nov 2010
Location: Alabama
Points: 5
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Jan 2011 at 9:38pm |
|
Thanks for the reply. I bought it used and it had a 4 cylinder gas engine in it. Also I figured out the lack of power problem the inching valve was not closing all the way. Adjusting the linkage corrected the problem and it will spin the tires now. It does have the 2 speed transmission.
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 22511
|
Post Options
Thanks(0)
Quote Reply
Posted: 31 Jan 2011 at 6:55am |
Gas engine ??? Mine has a diesel in it,a Buda ??.Same model number. Can lift 5,000# up 7 feet ! Always in low gear,scary going down the road at any speed !Besut $$ I've spent in a long time and it is an Allis !
Nice to know someone else has one
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 22511
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Sep 2020 at 9:17am |
OK, hoping to reopen this thread.. I'd like to know how to put the '2 speed' control BACK onto the dash or wherever it's supposed to be.
Mine has a 'custom' lever on the floorboard, leftside, behind the heel of my boot. Up seems to be low, down = high. A picture would be nice....Google hasn't been to helpful, sigh....
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
sinklar
Bronze Level
Joined: 09 Nov 2010
Location: Alabama
Points: 5
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Sep 2020 at 9:46am |
|
I don't think mine has the 2 speed option. I will try to find my manual over the next couple of days and see if it has a drawing.
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 22511
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Oct 2020 at 5:25am |
Thanks.. I've asked Google, several ways, but can't find a picture, cept one that kinda shows a knob on stick,near the parking brake, left of the 'inching' pedal.
I may create another 'winter project' and try to figure out how to make it. Right now my left heel hits the 'lever' down and into high gear. meantime I might just put into low and disconnect , under the footboard access panel.
Jay
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
sinklar
Bronze Level
Joined: 09 Nov 2010
Location: Alabama
Points: 5
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Oct 2020 at 10:21am |
Here is a picture from my forklift, it show the cable by the steering wheel. Also I have a picture from the parts manual I have included. If you by chance find a suitable cable I would be interested because mine is froze up. 
|
|
sinklar
Bronze Level
Joined: 09 Nov 2010
Location: Alabama
Points: 5
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Oct 2020 at 10:27am |
The other picture 
|
|
NomoreJohnDeere
Silver Level
Joined: 24 Jul 2017
Location: Missouri Ozarks
Points: 308
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Oct 2020 at 11:29am |
you can have a cable made
|
|
HD3
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 22511
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Oct 2020 at 2:04pm |
hmmm... your hi-lo cable is where my parking brake is attached ! Makes sense about a cable instead of 'bars of steel'.... as a 'bodge', I've disconnected the PO bodge, stuck it in LO and real happy I can get up my driveway now without taking a friggin run from acorr the road !!! I should make it a real 'Winter project' though.... Thanks Jay
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
Dan W
Bronze Level
Joined: 23 Oct 2020
Location: Union MO
Points: 2
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Oct 2020 at 10:10pm |
|
I have a FP50-24 2ps. Serial 65839. It has a lot of play up and down on the output shaft of the transmission. What transmission is this? Is there parts break down available?
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 22511
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Oct 2020 at 5:24am |
Hay Dan I don't know but does yours have a hi-nu-lo range gear shift ? You can save pictures and post them, or even email me them( greensvillejay@gmail.com). I KNOW the Ujoint 'drivehaft' is missing LOTS of needle bearings..... I've yet to find a manual for mine. It has a Buda 4cyl BD153 diesel in it.....
Jay
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
Dan W
Bronze Level
Joined: 23 Oct 2020
Location: Union MO
Points: 2
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Oct 2020 at 5:01pm |
|
Yes it needs a ujoint but before I open a can of worms I want to have an idea of what I am getting into. The output shaft is definitely moving up and down in the trans. I found a lever on the side of trans I am pretty sure it is for the 2 speed selector I will take pics tomorrow .
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 22511
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Oct 2020 at 5:14pm |
I made a set of ramps/platforms out of 2by10s last month. 4' ramps and then 'sections' of platforms..1',3',2' . This way I could remove the 3' center sections and gain good access to oil pan and inspect 'stuff'. My 2 speed selctor was a 'stick' behind left heel... PITA as up was low, down was high and of course heel ALWAYS caught the stick. I've since fixed it to 'low'. MUCH better torque, climbs hill better, just tortise slow.....
Jay
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
Phil Stier
Bronze Level
Joined: 17 Oct 2009
Location: sussex wi
Points: 75
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2021 at 10:32am |
|
I would like to revive this thread. I have just purchased an Allis Chalmers FP-50 forklift with a gas engine. It came with no battery. How can I tell if it’s 6v or 22v??
|
|
Phil Stier
Bronze Level
Joined: 17 Oct 2009
Location: sussex wi
Points: 75
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2021 at 10:35am |
|
Twelve volt
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 22511
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2021 at 11:02am |
|
yup, 12 volt, reminds me I gotta put oil in mine soon.....
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
