| Author |
 Topic Search  Topic Options
|
MattLF9 
Bronze Level
Joined: 27 Nov 2009
Location: Minnesota
Points: 187
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: The infamous 426
Posted: 19 Nov 2013 at 1:05pm |
|
I'm sure you guys should know this. Is the 670l or any other 426 an interference or non-interference design? I have one that threw a rod and broke the camshaft and need to know this.
|
|
A little CQB never hurt anybody.
|
 |
|
Sponsored Links
|
|
|
wi50
Orange Level
Joined: 24 Sep 2010
Location: weegieland
Points: 1010
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Nov 2013 at 3:36pm |
|
interference, chances are you've got lots more valvetrain issues
|
|
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20562
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Nov 2013 at 3:40pm |
|
I don't know of ANY diesel engine that could survive a broken camshaft and not have valves striking pistons somewhere.
|
|
MattLF9
Bronze Level
Joined: 27 Nov 2009
Location: Minnesota
Points: 187
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Nov 2013 at 5:28pm |
|
Oh boy...this is going to get expensive.
|
|
A little CQB never hurt anybody.
|
|
Unit3
Orange Level
Joined: 17 Oct 2009
Location: NC Iowa
Points: 5539
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Nov 2013 at 9:57pm |
|
7080's did. Dealer told of a customer that had a 7080that was starting to get a noise in it. With a half a day to plow, he finished and then they tore into it. He said the crank broke in such a way that everything still moved as if it was one piece. For how much longer is anyone guess.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20562
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Nov 2013 at 7:12am |
Broken camshaft, not crankshaft.
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 4918
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Nov 2013 at 10:02am |
|
A friend of mine who pulls his 220(fellow member here)had the front of his cam snap off toward the end of a pull, stopped it cold! lol! He slid the old cam out, and slid another in, and never pulled the head off. It ran the same afterward. It did bend a bunch of pushrods, but since the valves are square to the pistons, it didn't seem to hurt any valves. The pushrods are supposed to be the weak link anyway. His original cam did not have the bolt for the gear, the one I sold him to put in it did. The good part is at least when it gets pulled apart, we'll know right where to put the valve reliefs for the bigger cam that'll go back in it. lol!
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
