Allis Chalmers FP40 24 fork lift

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I have an Allis Chalmers FP40 24  fork lift. Starts and runs fine but just today the forks will not lift or tilt. Hydraulic tank is half full. Fluid looks clean no sign of water contamination. No fluid sound changes when either of the levers are moved in either direction. No visible signs of busted hose. I just used it last week to remove a pickup truck bed..today it starts and runs good but won’t lift or tilt. It does sit out in the weather rain or shine. Is there a by pass valve somewhere that allows the fluid to continue to circulate when the cylinders are not moving? I’m wondering if it has a bypass valve that might be stuck open. Any help is greatly appreciated. 

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Mike Price Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 22 Nov 2022 Location: Virginia Points: 5	Post Options Post Reply Quote Mike Price Report Post Thanks(0) Quote Reply Topic: Allis Chalmers FP40 24 fork lift Posted: 22 Nov 2022 at 9:51pm
	I have an Allis Chalmers FP40 24 fork lift. Starts and runs fine but just today the forks will not lift or tilt. Hydraulic tank is half full. Fluid looks clean no sign of water contamination. No fluid sound changes when either of the levers are moved in either direction. No visible signs of busted hose. I just used it last week to remove a pickup truck bed..today it starts and runs good but won’t lift or tilt. It does sit out in the weather rain or shine. Is there a by pass valve somewhere that allows the fluid to continue to circulate when the cylinders are not moving? I’m wondering if it has a bypass valve that might be stuck open. Any help is greatly appreciated.

Sponsored Links

steve(ill) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81328	Post Options Post Reply Quote steve(ill) Report Post Thanks(0) Quote Reply Posted: 22 Nov 2022 at 10:06pm
	normally the bypass would be inside the valve.. Pump will pump thru the valve and back to the tank until a spool is pulled and that closes off the bypass and sends to oil to the cylinder........ you might loosen the SUPPLY hose from the pump into the valve and see if you have pressure.. Could the inline filter be plugged or frozen ? could the coupler on the pump have broken and pump dont turn ?
	Like them all, but love the "B"s.

DiyDave Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: Gambrills, MD Points: 51728	Post Options Post Reply Quote DiyDave Report Post Thanks(0) Quote Reply Posted: 23 Nov 2022 at 4:33am
	X2 on the pump coupler. you need to look at the pump, the first question is is it turning?
	Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!