| Author |
 Topic Search  Topic Options
|
DSeries4 
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7338
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: B110 Mower deck
Posted: 18 Oct 2022 at 8:08pm |
I have the 42" mower deck from a B110 torn apart. The shafts that the rollers ride on are worn down. Each shaft appears to be attached to one of the mounting brackets. Are they supposed to be welded on? I am not sure - The previous owner enjoyed using their welder. It is not very clear in the parts book.
Appreciate any feedback!
Edited by DSeries4 - 18 Oct 2022 at 8:11pm
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
 |
|
Sponsored Links
|
|
|
Mikez
Orange Level Access
Joined: 16 Jan 2013
Location: Usa
Points: 8394
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Oct 2022 at 8:50pm |
|
Just welded on one side. The other side just slides over. We have been just welding in new bar stock and if rollers are worn enough ponding plastic tubing inside them
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7338
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Oct 2022 at 9:31pm |
Thanks Mike. I am going to get new shafts made and welded in. Already got new rollers from Sandy Lake. Bushings are available for the rollers.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
