This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
D-15 Diesel series 1 |
Post Reply |
Author | |
melenia
Bronze Level Joined: 28 Feb 2024 Location: Pennsylvania Points: 15 |
Post Options
Thanks(0)
Posted: 02 Aug 2024 at 10:01am |
I replaced the brake shoes on a D15 series one tractor. The shoes were the correct size. The drums were in pretty good shape. Also, replaced seals. Put everything back together and now brakes are worse than before. Brake rod adjusted to maximum position, still no brakes. Brake pedals have no resistance. Is it possible that I did not install the brake actuator properly? As you can probably tell, I am not very experienced at this.
|
|
Sponsored Links | |
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20528 |
Post Options
Thanks(0)
|
Maximum position should mean as LONG as possible.
|
|
melenia
Bronze Level Joined: 28 Feb 2024 Location: Pennsylvania Points: 15 |
Post Options
Thanks(0)
|
Thank you for responding! Yes, it is in the longest position. Could it be that the actuator is worn so much that it would act this way? I read where others have had this problem.
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20528 |
Post Options
Thanks(0)
|
I'd say the actuator lever wasn't positioned correctly between the bottom of the shoes to be able the spread them apart when you step on the brake pedals. Been a long time since I've done one of those, but that's almost what it has to be.
|
|
ACinSC
Orange Level Joined: 16 Dec 2015 Location: South Carolina Points: 2766 |
Post Options
Thanks(0)
|
We did our D 15 back in Dec 2015 . Just looked and the post and pics are still on here . Sadly I don't know how to share them . Good luck !
|
|
melenia
Bronze Level Joined: 28 Feb 2024 Location: Pennsylvania Points: 15 |
Post Options
Thanks(0)
|
When I put it back together, I didnt think the actuator moved the shoes that much. Any idea how far they should move. Seems like it only moved the shoes about 3/16 of an inch. At the time I was thinking it should move farther than that.
|
|
Glenn (NJ)
Bronze Level Joined: 11 Sep 2009 Location: NW NJ Points: 47 |
Post Options
Thanks(0)
|
The actuator arm and cam are handed. If you had both sides apart at the same time you may have mixed them up. Been there, done that.
|
|
Kenny L.
Orange Level Access Joined: 12 Sep 2009 Location: NEIOWA Points: 1273 |
Post Options
Thanks(0)
|
I done mind last winter and yes they move more then 3/16" , if I remember right it's like 2".
|
|
Rick of HopeIN
Orange Level Joined: 11 Sep 2009 Location: Hope, Indiana Points: 1324 |
Post Options
Thanks(0)
|
I just put a D14 back together. The levers were on wrong side, switch sides and they were fine. The shop manual is not so clear what view they are showing.
|
|
1951 B, 1937 WC, 1957 D14, -- Thanks and God Bless
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |