| Author |
 Topic Search  Topic Options
|
twinson 
Bronze Level
Joined: 17 Aug 2019
Location: IL
Points: 80
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: How screwed am I on this Allis WD45 block?
Posted: 18 Nov 2024 at 1:26pm |
What are the chances that both sleeve rings have failed on sleeve 3 & 4 and the block is not cracked? 
Edited by twinson - 18 Nov 2024 at 1:35pm
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20523
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2024 at 6:10pm |
|
What are the odds that four Orings have failed on TWO sleeves exactly in the center of the block right where the blocks are known to crack ??
|
|
twinson
Bronze Level
Joined: 17 Aug 2019
Location: IL
Points: 80
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2024 at 7:49pm |
Yeah, that's what I was thinking. This block is junk then correct?
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4924
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2024 at 8:57pm |
|
Kinda looks like the one cylinder has been leaking for awhile according to the rust around the sleeve at the block. Did you pressure test it?
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20523
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2024 at 9:23pm |
|
Probably junk.
|
|
twinson
Bronze Level
Joined: 17 Aug 2019
Location: IL
Points: 80
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2024 at 9:28pm |
|
Pressured up to 15psi and started dripping. Lost pressure within 5 minutes.
Edited by twinson - 18 Nov 2024 at 9:29pm
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4924
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Nov 2024 at 6:59am |
|
It may be junk but the only way to know is to tear it apart. A few hours of work and you will know.
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
Lon(MN)
Orange Level
Joined: 11 Sep 2009
Location: Elk River,MN
Points: 1970
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Nov 2024 at 7:07am |
|
I have a bare block with no cracks between the cylinders if you are interested.
|
|
http://lonsallischalmers.com
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 81240
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Nov 2024 at 8:03am |
|
has anyone ever tried any BLOCK SEALER in this application... Either something like BARS that you pour into the antifreeze and run it... or a liquid you pour in around the liners and let it harden around the base ? ( when the block is empty and head is off )..
|
|
Like them all, but love the "B"s.
|
|
HudCo
Orange Level
Joined: 29 Jan 2013
Location: Plymouth Utah
Points: 3542
|
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 10:13am |
|
i would like to see bad the pitting is right around the orings my series 4 engine block my might be to bad to keep mine sealed sealed up , dont know if any thing can be done down in the bottom of the counter bores
|
|
Sugarmaker
Orange Level
Joined: 12 Jul 2013
Location: Albion PA
Points: 8289
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 hours 27 minutes ago at 8:42pm |
twinson, BTDT. It sounds like your pressure test found the issue. Were you getting coolant in the oil? Gray foamy stuff under the valve cover? I had to replace the block in my 45 project. Just lucked out and had a rebuild-able block sitting in the garage. It was not a cheap date, but nothing is now days. You might find a running engine?? Keep us informed. Regards, Chris and Cheryl
|
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
twinson
Bronze Level
Joined: 17 Aug 2019
Location: IL
Points: 80
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 hours 25 minutes ago at 8:44pm |
|
Gray foam yes. Looking for a new block that wouldn't too far of a drive.
|
|
