| Author |
 Topic Search  Topic Options
|
AddictedtoAllis 
Bronze Level
Joined: 24 Jun 2024
Location: WI
Points: 9
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: AC 170 hydraulic hard line replacement
Posted: 14 Nov 2024 at 8:58pm |
Hello! I have a hole in the hydraulic hard line for the lift arms. Anyone know where I could get a replacement one?
It's the later 170 model with the hydraulic pump in the front.. the short section in the front to the pump is fine, but the back half, just behind the fittings that connect the front line to the rear half is where the hole is.
Thanks guys!
Edited by AddictedtoAllis - 14 Nov 2024 at 8:59pm
|
 |
|
Sponsored Links
|
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 908
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Nov 2024 at 9:24pm |
What kind / size hole; pin, worn thru, cracked? A lot of lines w small holes and even cracked almost into 2 pieces have been repaired by brazing the area. It's an option if you can't find a replacement line. OR a hydraulic hose can be fabricated to replace it. IT won't look OEM to the purists, but it does cure the leak.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
AddictedtoAllis
Bronze Level
Joined: 24 Jun 2024
Location: WI
Points: 9
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Nov 2024 at 9:47pm |
Thanks for the quick reply! It's a small worn through spot. I didn't even think of brazing! I'll probably give that a go first! Thanks!
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20519
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Nov 2024 at 6:20am |
|
I suppose AGCO doesn't have it available anymore ?? My local hydraulic hose business (they are EXCELLENT) actually makes steel lines such as that. Take them the old line and in 10 or 15 minutes they will have you a new one shaped just like your old one.
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7335
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Nov 2024 at 8:14am |
|
Those long lines are not available anymore. I needed some for my 175 some years ago. A small patch can be brazed no problem. My old lines were bent and mangled out of shape, so they could not be used as a pattern to have new ones made. Had to borrow straight ones to have new lines made by my local hydraulic shop, still had to do some tweaking to get them to line up and look right. But in the end, it all worked out good.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
