This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
D 15 oil pressure |
Post Reply |
Author | |
ACinSC
Orange Level Joined: 16 Dec 2015 Location: South Carolina Points: 2762 |
Post Options
Thanks(1)
Posted: 22 Mar 2024 at 6:15am |
When it's hot (190 degrees) my gauge reads about 5 psi at low idle and about 15 psi at full throttle. Guess this is normal for a well worn gas engine? Thanks
|
|
Sponsored Links | |
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81108 |
Post Options
Thanks(0)
|
A D15 should have the FULL FLOW PH8 type filter ?? 15 psi is a little low, but like you said, its OLD and thats what you get. As long as you have FLOW it should be OK....What viscosity is the oil ? New filter ?
|
|
Like them all, but love the "B"s.
|
|
ACinSC
Orange Level Joined: 16 Dec 2015 Location: South Carolina Points: 2762 |
Post Options
Thanks(0)
|
Thanks Steve, it's time for a oil change. Can't remember if I used 10W30 or 15W40 rotella. I have it written in my maintenance log out in the shop. Yeah I'm thinking it's full flow.
Edited by ACinSC - 22 Mar 2024 at 8:18am |
|
AC720Man
Orange Level Joined: 10 Oct 2016 Location: Shenandoah, Va Points: 4910 |
Post Options
Thanks(0)
|
We run AGCO filters on our tractors, our D15 series II runs 3/4 on the normal range of the factory gauge but we rebuilt the engine last year. Not sure what psi range that is though. Assuming maybe a 30 psi gauge?
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
ACinSC
Orange Level Joined: 16 Dec 2015 Location: South Carolina Points: 2762 |
Post Options
Thanks(0)
|
Thanks Robbie
|
|
EPALLIS
Orange Level Joined: 12 Sep 2009 Location: Illinois Points: 1131 |
Post Options
Thanks(0)
|
When I first acquired my D-15 Series I, it also ran a little low on oil pressure. However, When I changed the oil with high quality 10w30 and installed the AGCO oil filter, all was back to NORMAL. With pointer on the R. Good Luck!
|
|
ACinSC
Orange Level Joined: 16 Dec 2015 Location: South Carolina Points: 2762 |
Post Options
Thanks(0)
|
Thanks EPALLIS , just checked and I'm running 15W40 Rotella and a NAPA Gold filter .
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |