6060 Rear Brakes

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Still looking for somebody who has repaired the rear brakes on the 6000 series tractor.  The service manual isn't too clear and there are few pictures.  Looks like I have to pull the rear wheel and axle and the brake disk and caliper is in the differential.    I have bled the brake and the pedal is hard, no give, so I am presuming something is broken or jammed in the caliper.
Bill

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
WNYBill Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 04 Jun 2016 Location: WNY Points: 276	Post Options Post Reply Quote WNYBill Report Post Thanks(0) Quote Reply Topic: 6060 Rear Brakes Posted: 07 Mar 2019 at 9:43am
	Still looking for somebody who has repaired the rear brakes on the 6000 series tractor. The service manual isn't too clear and there are few pictures. Looks like I have to pull the rear wheel and axle and the brake disk and caliper is in the differential. I have bled the brake and the pedal is hard, no give, so I am presuming something is broken or jammed in the caliper. Bill

Sponsored Links

Fred in Pa Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 13 Sep 2009 Location: Hanover Pa. Points: 9210	Post Options Post Reply Quote Fred in Pa Report Post Thanks(0) Quote Reply Posted: 07 Mar 2019 at 10:34am
	Caliper is only for hand parking brake it is not on the rear axle . Just what is your problem .Foot brake or parking brake . Caliper comes out side of rear housing . Disc stay in on shaft for parking brake. Look over service manual again. Edited by Fred in Pa - 07 Mar 2019 at 10:38am
	He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED.

Ron(AB) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 27 Dec 2009 Location: Alberta Points: 958	Post Options Post Reply Quote Ron(AB) Report Post Thanks(0) Quote Reply Posted: 07 Mar 2019 at 11:57pm
	I believe there are o-rings inside the trumpet that need to be changed on a piston. Not quite a caliper but if you look at the Agco parts book it should have a pretty good image..

MACK Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 17 Nov 2009 Points: 7664	Post Options Post Reply Quote MACK Report Post Thanks(0) Quote Reply Posted: 08 Mar 2019 at 7:26am
	If pedal is hard but no brake, sounds like splines are striped on brake disc. Is both sides hard or just one? Need more info. MACK

WNYBill Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 04 Jun 2016 Location: WNY Points: 276	Post Options Post Reply Quote WNYBill Report Post Thanks(0) Quote Reply Posted: 08 Mar 2019 at 9:51am
	Not the parking brake, that works. It is the left wheel brake. I have bled the system and both pedals go down while being pressed with bleeders open. After closing the bleeders, the right brake works but the left brake will not depress. Like it is hitting something solid. I have right wheel brakes only. I am not at home to reference the service manual. However, I have looked at it and understood there was a caliper and disk and it appears to be in the differential. I am looking for somebody that has repaired or replaced the wheel brakes and can explain how they work. AND, what I have to remove to get in there. Bill

LB0442 Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 27 Dec 2014 Location: Boise ID Points: 767	Post Options Post Reply Quote LB0442 Report Post Thanks(0) Quote Reply Posted: 08 Mar 2019 at 2:31pm
	The service brakes are splined to the sun gear off the differential. They are a wet brake oiled from rear end fluid. If you can get fluid movement out of the bleeder on that side then you have ruled out the master cylinder. It has to be in the brake piston/ brake disc area. If it were mine before I took it apart I would pull the bleeder screw and blow compressed air in there to try and get the piston broke loose (going to have a lot of oil spray when doing this). You are not going to be in any of a worse situation even if you blow a seal on the piston because it has oil for brake fluid ( I use trans fluid in mine). Start with a lower pressure and work up to a higher pressure. The piston for brake apply is just like a piston for an auto trans or power shift. You will have to pull the axle/final drive housing. It is set on studs so it makes it a little easier, there is a ring gear for the final drive then the short shaft that has the sun gear on it then the brake disc then piston. None of it is light.

Alvin M Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 24 Jun 2018 Location: PA Points: 765	Post Options Post Reply Quote Alvin M Report Post Thanks(0) Quote Reply Posted: 08 Mar 2019 at 3:17pm
	if somebody used brake fluid the seals swell up and can get tight