This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
D17 IV Steering Pump |
Post Reply |
Author | |
Travis2766
Silver Level Joined: 26 Aug 2015 Location: Amherst, Wi Points: 408 |
Post Options
Thanks(0)
Posted: 31 Aug 2024 at 5:56pm |
My series IV D17 has a loader, the steering works fine when the loader is not on but when the loader is on the power steering is very weak. I started looking for a new pump but $600-800 is crazy for the ones I’ve been finding. What other options do I have? Can the one I have be rebuilt?
|
|
190XT Series III, D17 Series IV, D15 Series II, All Crop 66 and a whole mess of equipment.
|
|
Sponsored Links | |
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20494 |
Post Options
Thanks(0)
|
The power steering pump could be worn, but if it isn't leaking oil out the shaft, it's probably as good as any of them. I don't know how long you've used this tractor on a loader, but the power steering is a power assist system. So it isn't as good as say a 170 or 180 with hydrostatic power steering. Make sure your power steering belt
is tight and in good condition. A slipping belt will make your power steering weak. Also, pump up the front tires to 30 psi minimum for loader work. Lastly, if you change the power steering oil (5 quarts) and switch to 821/821XL hydraulic fluid, it will help if the pump is worn internally because it is a little heavier in viscosity. The power steering pump might be fine while the power steering control valve could be the problem. Try these other things first.
|
|
Fred in Pa
Orange Level Joined: 13 Sep 2009 Location: Hanover Pa. Points: 9210 |
Post Options
Thanks(0)
|
I always flow rate the pump first .Takes away the guess work .If pump is bad get them rebuilt or replace .If good go to next step in the system.
|
|
He who dies with the most toys is,
nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20494 |
Post Options
Thanks(0)
|
Agreed, but who has a flow-meter besides you and me ??
|
|
8070nc
Orange Level Access Joined: 21 Mar 2019 Location: North Carolina Points: 505 |
Post Options
Thanks(0)
|
I dont know if this will help or not. When i grease front spindles I jack up the axle to take pressure off the bottom so grease can get between where the weight is resting
|
|
1984 80780
1957 D14 DES 300 with 25000 engine 616 tractor |
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20494 |
Post Options
Thanks(0)
|
I'm very surprised a NEW replacement power steering pump is even available from anyone, let alone for $600 to $800 bucks. That sounds like the price for a good USED pump.
Edited by DrAllis - 02 Sep 2024 at 8:40am |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |