| Author |
 Topic Search  Topic Options
|
N6PETE 
Silver Level
Joined: 02 Jan 2010
Location: Camanche, Iowa
Points: 227
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 1971 190xt motor and other parts
Posted: 05 Jan 2022 at 6:57pm |
I have a nice motor out of a 1971 190XT with a freshly rebuilt ($900) injection pump. The motor is out of a 200 and has about 2,000 hrs on a major rebuild ($6500 15 years ago). All I ever used it for was to plant with a 6 row planter, haul loads up to the auger and bushhog with a 6' mower. It is in two pieces after the torque tube broke trying to get it out of a deep mud hole. I was going to transplant the motor but I have decided to part out the tractor. I also have two very nice fenders, a nice straight grill plus a good trans that did not jump out of gear. The tires are 18.4x34 and are 80% rear end is also good. If you want to buy the entire tractor shoot me a price. From what I am told the motor is worth $2500 and the grill can go for as high as $800 or more. The fenders are probably worth $750 for the pair. I am not sure what the trans and rear end are worth but the tires and rims are probably are around $750 given the price of rubber. I can send pics once the weather clears.
Edited by N6PETE - 05 Jan 2022 at 8:14pm
|
 |
|
Sponsored Links
|
|
|
N6PETE
Silver Level
Joined: 02 Jan 2010
Location: Camanche, Iowa
Points: 227
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Jan 2022 at 6:59pm |
563-357-7992 Eastern Ia. Camanche
|
|
N6PETE
Silver Level
Joined: 02 Jan 2010
Location: Camanche, Iowa
Points: 227
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Jan 2022 at 8:20pm |
|
|
|
N6PETE
Silver Level
Joined: 02 Jan 2010
Location: Camanche, Iowa
Points: 227
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Jan 2022 at 8:22pm |
|
|
|
N6PETE
Silver Level
Joined: 02 Jan 2010
Location: Camanche, Iowa
Points: 227
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Jan 2022 at 8:26pm |
|
|
|
nickia
Orange Level
Joined: 11 Sep 2009
Location: alden iowa
Points: 785
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Jan 2022 at 8:35pm |
rear tires is 750 for the pair?
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20493
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Jan 2022 at 8:50pm |
|
Koyker loader ?? Seen that three times before, this would make the fourth.
|
|
MACK
Orange Level
Joined: 17 Nov 2009
Points: 7664
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Jan 2022 at 8:55pm |
|
Loader didn't have braces to rear axel. Every one without braces to rear axel, you may be next. MACK
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8106
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Jan 2022 at 8:57pm |
|
WOW,,,, Some interesting ppl out there,,, that havent a clue on equiment,, sad
Edited by DougG - 05 Jan 2022 at 9:08pm
|
|
DCAC
Orange Level
Joined: 20 Oct 2018
Location: east central SD
Points: 511
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Jan 2022 at 9:38pm |
|
|
|
N6PETE
Silver Level
Joined: 02 Jan 2010
Location: Camanche, Iowa
Points: 227
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Jan 2022 at 12:59am |
|
Yes $750 includes both tires and rims.
|
|
Luke R.
Orange Level
Joined: 11 Sep 2009
Location: SE Iowa
Points: 1262
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Jan 2022 at 6:55am |
|
could this have in anyway messed up the crank in the engine? DR. or Mack what are your thoughts?
|
|
4-7030's,170G,220FWA,3-220's,210,D21II,D21I industrial,2-200's,3-190's,175D,2-D19D's,D19G,WD45,WD,CA,2-UCont.,5015FWA,917,B110,Gleaner F
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20493
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Jan 2022 at 8:45am |
|
The three I've done didn't have any engine issues afterwards, but not sure they were bowed down as much as this one looks in the first picture. Probably need a new clutch disc regardless as the center hub may be hurt.
|
|
N6PETE
Silver Level
Joined: 02 Jan 2010
Location: Camanche, Iowa
Points: 227
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Jan 2022 at 10:05am |
|
I have my doubts that the crank is hurt as the bowing occured after it came apart. We were pulling it straight back when it broke, I will post more pics of the back half once it warms up here.
|
|
ILGLEANER
Orange Level Access
Joined: 13 Sep 2009
Location: Willow Hill,ILL
Points: 6448
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Jan 2022 at 7:25pm |
|
So with everything said. Sounds like someone was telling you prices on the highest of sides for what you listed (fenders,grill,engine) but the crank could be hurt. What would you take for the whole tractor ?
IG
Edited by ILGLEANER - 06 Jan 2022 at 7:26pm
|
|
Education doesn't make you smart, it makes you educated.
|
|
FREEDGUY
Orange Level Access
Joined: 15 Apr 2017
Location: South West Mich
Points: 5391
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Jan 2022 at 7:38pm |
Just out of curiosity, HOW can a tractor fold in the middle ?? This is why there are specified machines for loader work IMO  . What a waste of iron 
|
|
N6PETE
Silver Level
Joined: 02 Jan 2010
Location: Camanche, Iowa
Points: 227
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Jan 2022 at 7:39pm |
After a number of calls from people I am thinking $3,000 for the entire tractor. The grill is excellent, fenders are excellent, trans is not a jumper, tires/rims are good. It is a 71 so it has the heavy axles. Plus the injection pump has less than 50 hours on it since I had it rebuilt (about $900). It has had a coolant conditioner on it since it was rebuilt ~2000 hrs ago (estimate) and light usage since the rebuild. I have my doubts that there is a crank issue given how it broke apart. Dr Allis has not had that issue with similar tractors.
pm or call if interested
|
|
N6PETE
Silver Level
Joined: 02 Jan 2010
Location: Camanche, Iowa
Points: 227
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Jan 2022 at 7:46pm |
This is what it looked like before. 
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4914
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Jan 2022 at 8:35pm |
|
Damn shame, that was a nice series III. Sending Pm
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
N6PETE
Silver Level
Joined: 02 Jan 2010
Location: Camanche, Iowa
Points: 227
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Jan 2022 at 8:49pm |
|
Tractor is sold. Thanks for all the interest.
|
|
