This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
New house electrical question |
Post Reply | Page <12 |
Author | |
DMiller
Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 31067 |
Post Options
Thanks(0)
|
Should work fine, how far have to run and any severe rock in the soil? Under NEC code also needs to be at least 24" down.
|
|
Sponsored Links | |
JimD
Orange Level Joined: 11 Sep 2009 Location: Mounds, OK Points: 2102 |
Post Options
Thanks(0)
|
Do not need to bury, this will be interior run.
|
|
Owner of OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.
We have new and used parts. 877-378-6543 |
|
JimD
Orange Level Joined: 11 Sep 2009 Location: Mounds, OK Points: 2102 |
Post Options
Thanks(0)
|
It's just a lot cheaper than copper 3/0.
|
|
Owner of OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.
We have new and used parts. 877-378-6543 |
|
allis g
Orange Level Joined: 10 Jan 2012 Location: Templeton Points: 402 |
Post Options
Thanks(0)
|
That looks like aluminum can’t
’ Use it in Calif I wouldn’t anyhow too high fire risk. It expands and contracts too much. |
|
shameless dude
Orange Level Joined: 10 Apr 2017 Location: east NE Points: 13607 |
Post Options
Thanks(0)
|
I spose running an extension cord is outta the question huh? lol
|
|
DMiller
Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 31067 |
Post Options
Thanks(0)
|
All the local electrical contractors use is Aluminum Tri Plex for high amp runs. My own home as are 90% are is fed from the meter base to the breaker panel with same. Not so much a concern for heat and fire probabilities as the old 12/2 w/grd house wire.
|
|
Allis dave
Orange Level Joined: 10 May 2012 Location: Northern IN Points: 2916 |
Post Options
Thanks(0)
|
The boxes aren't "Big" to hold a bunch of breakers. The boxes are big to have plenty of room to route those big 4/0 service feed cable and maintain proper bend radius.
Depending on code in your state, you may have to run a 4-wire for your house. In Indiana, all grounds have to run back to the main disconnect.
|
|
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81122 |
Post Options
Thanks(0)
|
4/0 AL cable is good for 205 amps ......... the ground wire 2/0 is good for about 150 amps.... that should be fine for entrance cable. I have had similar in my house for 40 years.
|
|
Like them all, but love the "B"s.
|
|
Ryanlark
Bronze Level Joined: 20 Sep 2020 Location: Virginia Points: 16 |
Post Options
Thanks(0)
|
Maybe you should hire a professional electrical company? I am kind of afraid of stuff like this to do it on my own, and it’s better to be safe than sorry. I just learned that from my own mistake. When I moved to my new house, in the beginning everything was perfect. I hired a professional moving company https://texasmovingusa.com/ to help me with everything. After I settled in, I noticed there is a problem with the kitchen switch. I tried to fix it on my own, but the problem was way complicated then I knew. I ended up hurting myself pretty bad, and even made the switch problem worse. So, know I just hire people to help me.
Edited by Ryanlark - 11 May 2021 at 5:16am |
|
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81122 |
Post Options
Thanks(0)
|
After 2 years....i HOPE he already has it installed !!
|
|
Like them all, but love the "B"s.
|
|
Sugarmaker
Orange Level Joined: 12 Jul 2013 Location: Albion PA Points: 8280 |
Post Options
Thanks(0)
|
Me too!
Regards, Chris
|
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |