| Author |
 Topic Search  Topic Options
|
gleaner1 
Silver Level
Joined: 17 Dec 2009
Points: 216
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 8000 series power director questions
Posted: 10 Aug 2023 at 4:48pm |
|
Finally joined the 8000 series club.
8050 , with power director bought over the phone and low and behold the hi low pwr shift doesn’t work.
Im used to the buttons on the floor.
I’m assuming I should start diagnosing at the switch, solenoid, valve body? Im not sure how these style are set up. Any advise before I start tearing into it?
And of course no service records or books came with the tractor.
Thanks
|
|
ALLIS CHALMERS "The color is orange"
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20479
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Aug 2023 at 5:16pm |
|
Make sure the clutch pedal comes clear UP. Hook your toe under it and pull it fully UP. Could be a bad switch on the clutch pedal too, which does the same thing.
|
|
Amos
Orange Level
Joined: 11 Sep 2009
Location: Ontario
Points: 1316
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Aug 2023 at 8:30pm |
|
Check the fuse if Dr's procedure doesn't cure it
|
|
MACK
Orange Level
Joined: 17 Nov 2009
Points: 7664
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Aug 2023 at 9:03pm |
|
8050 should have the PD switch on steering column not buttons on floor. MACK
|
|
Ron(AB)
Orange Level
Joined: 27 Dec 2009
Location: Alberta
Points: 958
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Aug 2023 at 11:40pm |
|
I'd start with the clutch pedal switches too.
|
|
405, 7000, 7050, 8050, 8070, L3, 2300 & 2600 disk
|
|
gleaner1
Silver Level
Joined: 17 Dec 2009
Points: 216
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Aug 2023 at 5:44am |
|
Thanks guys. I pulled two panels off the dash, the upper switch must have vibrated up wasn’t even near making contact. The bottom safety one i literally had to stand with all my weight to start it so that one is getting adjusted as well. I’ll try it out tomorrow. Fingers crossed that i have a good pwr director.
Any clutch cable adjustment i should do while under there?
I have no specs to go from.
Thanks
|
|
ALLIS CHALMERS "The color is orange"
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7482
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Aug 2023 at 8:47pm |
The wires on my 8050 fall off the magnetic actuator easily behind the power director valve behind the battery.
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
