Transmission lockup when shift plate is i

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello brand new to the forum. I have a question: I bought a CA a couple weeks ago at an auction. The note regarding the tractor, "stuck in second gear". I removed the side shift plate and was able to put the tractor in neutral very easily just with my finger. All the gears look fine. The problem is I can not get the shift plate on properly

 Every time I put the plate on it is locked up. You can not see the forks when you reinstall the shift plate. I saw where one fellow recommended putting everything in revere and installing the plate, then move the shift slots to neutral
 That does not work either. Is it possible to have bent shift paddles? 

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Don kissler Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 01 Dec 2023 Location: Freeburg, IL Points: 7	Post Options Post Reply Quote Don kissler Report Post Thanks(0) Quote Reply Topic: Transmission lockup when shift plate is i Posted: 01 Dec 2023 at 10:56pm
	Hello brand new to the forum. I have a question: I bought a CA a couple weeks ago at an auction. The note regarding the tractor, "stuck in second gear". I removed the side shift plate and was able to put the tractor in neutral very easily just with my finger. All the gears look fine. The problem is I can not get the shift plate on properly Every time I put the plate on it is locked up. You can not see the forks when you reinstall the shift plate. I saw where one fellow recommended putting everything in revere and installing the plate, then move the shift slots to neutral That does not work either. Is it possible to have bent shift paddles?

Sponsored Links