This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
"g" carb problems ?? |
Post Reply |
Author | |
wahl4m
Bronze Level Joined: 23 Jan 2018 Location: norwalk iowa Points: 3 |
Post Options
Thanks(0)
Posted: 23 Jan 2018 at 1:41pm |
i rebuilt the carb -wouldnt start! installed one of another "g" -run good ! took both apart -& compared parts -ckd the mating surfaces ,floats & levels -cant see anything wrong ?? what am i missing ?any ideas ?? thanks mike
|
|
Sponsored Links | |
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 22269 |
Post Options
Thanks(0)
|
plugged passage way ?
gasket wrong way ? it took me 3 'total tear down/clean/rebuilds' to get a CA hydraulic pump to run right... sorry,had 3 Gs, have none now to eyeball what it could be... jay |
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
HoughMade
Orange Level Joined: 22 Sep 2017 Location: Valparaiso, IN Points: 691 |
Post Options
Thanks(0)
|
Yeah, every time I've cleaned carb, it took several tries before it was good. Is it possible a gasket is flipped over and blocking a passage?
Edited by HoughMade - 23 Jan 2018 at 3:27pm |
|
1951 B
|
|
Gerald J.
Orange Level Joined: 12 Sep 2009 Location: Hamilton Co, IA Points: 5636 |
Post Options
Thanks(0)
|
http://geraldj.networkiowa.com/Trees/Allis-Chalmers-G-B-C-CA-Service.pdf
should show all the carburetor assembly and tuning details. Gerald J. |
|
wahl4m
Bronze Level Joined: 23 Jan 2018 Location: norwalk iowa Points: 3 |
Post Options
Thanks(0)
|
ckd all passages /gasket will only fit 1 way w/ float-i chd surfaces for warpage -all ok ! guess ill take it apart again ?? thanks
|
|
drobCA
Orange Level Joined: 20 Jun 2017 Location: Perris, CA Points: 292 |
Post Options
Thanks(0)
|
I had what I guess was a stuck float on a brand new carb.
disassembled, found no problems, reassembled = works fine. not the first time a take apart/reassembly doing nothing else has "fixed" whatever.
|
|
3 Ford 8N's I loan to neighbors, but the '52CA, '41B and little B1 I do not.
|
|
Larry in NC
Orange Level Joined: 09 Feb 2016 Location: NC Points: 1048 |
Post Options
Thanks(0)
|
From my experience, the usual problem is a clogged jet, but I cleaned the carburetor on my son's G and it would still would not run. When I pulled the carburetor apart a second time, there was no gas in the bowl. The problem was the float valve sticking. The valve was new, so I tried again and it did not work. Finally found a used valve and installed it and the tractor ran fine. Even new parts are not a guarantee.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |