| Author |
 Topic Search  Topic Options
|
one54dodgetruck 
Silver Level
Joined: 25 Jul 2011
Location: Chehalis, wa
Points: 399
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: d17 different series
Posted: 12 Dec 2011 at 12:30am |
what are the differences between the series 1-4 on the d17 tractors? thanks andrew
|
|
2 WDs
B
B112
D14
D15 shuttle
180
185
7040
Hd7w
D14
D15
185
7040 pd
|
 |
|
Sponsored Links
|
|
|
Doyle B(NY)
Silver Level
Joined: 20 May 2011
Location: New York
Points: 150
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Dec 2011 at 5:48am |
|
the series 4 is like a totally different tractor. has a hydraulic pump where the belt pully would be alot better hyd. pressure.
|
|
Pat the Plumber CIL
Orange Level
Joined: 11 Sep 2009
Location: Springfield,Il
Points: 4807
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Dec 2011 at 9:04am |
|
Long post earlier this year on this subject.No time to look for post this morn.Maybe someone else
|
|
You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails
1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF.
|
|
one54dodgetruck
Silver Level
Joined: 25 Jul 2011
Location: Chehalis, wa
Points: 399
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Dec 2011 at 11:01am |
i searched but couldent find the posts from earlier andrew
|
|
2 WDs
B
B112
D14
D15 shuttle
180
185
7040
Hd7w
D14
D15
185
7040 pd
|
|
Matt MN
Orange Level
Joined: 14 Sep 2009
Location: Silver lake MN
Points: 1491
|
Post Options
Thanks(1)
Quote Reply
Posted: 12 Dec 2011 at 11:52am |
Here is a chart that I found on the internet, I am not sure how accurate it is.
|
|
Unless your are the lead horse the scenery never changes!!
|
|
Don(MI)
Orange Level
Joined: 15 Sep 2009
Location: Michigan
Points: 3802
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Dec 2011 at 12:05pm |
|
Good chart, I thought the 3pt was standard on series IV, not snap coupler though?
|
|
Galatians 5:22-24
"I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!"
|
|
Ky.Allis
Orange Level
Joined: 31 Jan 2010
Location: Kentucky
Points: 1009
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Dec 2011 at 12:19pm |
|
I have a sales brochure on D-17 IV and it plainly states snap coupler is standard on it with 3 PT. hitch as an option.
|
|
Calvin Schmidt
Orange Level
Joined: 11 Sep 2009
Location: Ontario Can.
Points: 4526
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Dec 2011 at 7:28pm |
|
Series III and series IV tractors also had dry type air cleaners.
|
|
Nothing is impossible if it is properly financed
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20746
|
Post Options
Thanks(1)
Quote Reply
Posted: 12 Dec 2011 at 7:38pm |
|
Series one gas features.....small bypass engine oil filter and lines.....oil bath air cleaner.....same muffler as a WD45......governor driven power steering pump..... very narrow drawbar bail......two bolt rear pivot bracket on wide front.....single internal lift arm cylinder.......3700 PSI hydraulic pump not "live".....drum style brakes same as WD45.....radiator mounted headlites..... Series two gas features (there really is no Series 2 officially).......large full-flow eng oil filter......eventually there was a belt driven power steering pump......wider drawbar bail......larger muffler to quiet things down a bit......improved 4-bolt rear pivot on WF axle.........improved 3700 PSI hydraulic pump with an adjustable lowering speed......larger ball bearing on the transmission input shaft...... Series 3.....dry air filter.....oval muffler for even more quiet.......fender mounted headlites........hydraulic/power director compartments are now joined for more oil capacity and have a filter on them.......PTO and hand clutch gear idlers shafts have nuts on the ends......many transmission gears are changed and made wider and stronger.......combination band&disc brakes.......stronger bull and bull pinion gear final drives........Series 4.......same as S3 but the addition of the new "high volume-live hydraulic" system........new lift arms and external lift cylinders.....new heavy duty drawbar bail with adjustable height...........Overview....with each change, there was a need for improvement because of too many failures or lack of performance......the D17 was probably the best overall model they ever made and the sheer numbers of their production is a testament to that.
|
|
Brian Jasper co. Ia
Orange Level
Joined: 11 Sep 2009
Location: Prairie City Ia
Points: 10508
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Dec 2011 at 7:42pm |
|
And the generator driven p/s pump was a diesel only deal wasn't it?
|
|
"Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford
|
|
Eldon (WA)
Orange Level
Joined: 11 Sep 2009
Location: Spokane, WA
Points: 7765
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Dec 2011 at 7:49pm |
|
Series III and IV had the different rear wheel centers where the PAW eccentrics were replaced with a one piece wedge....and the pie weights were changed to fit them.
|
|
ALLIS EXPRESS!
This year:
|
|
CTuckerNWIL
Orange Level
Joined: 11 Sep 2009
Location: NW Illinois
Points: 22823
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Dec 2011 at 7:53pm |
|
Matt, your chart shows series I from 1001-31625. Down below it says Black bar grill starting at 240013. Which digit needs removed in the 240013 to make it fit in the series I sequence? My 17 is number 29625 so it is very close to the end of the series I.
The full flow oil system came out towards the end of the "Series I" Mine has it.
Edited by CTuckerNWIL - 15 May 2018 at 9:32am
|
|
|
|
one54dodgetruck
Silver Level
Joined: 25 Jul 2011
Location: Chehalis, wa
Points: 399
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Dec 2011 at 1:48am |
wow thats alot of info thanks everyone, is it pretty much the same differences for all the d series? andrew
|
|
2 WDs
B
B112
D14
D15 shuttle
180
185
7040
Hd7w
D14
D15
185
7040 pd
|
|
Tim8975
Bronze Level
Joined: 05 Sep 2011
Location: Clarksville, MI
Points: 37
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Dec 2011 at 10:37am |
 CTuckerNWIL wrote:
Matt, your chart shows series I from 1001-31625. Down below it says Black bar grill starting at 240013. Which digit needs removed in the 240013 to make it fit in the series I sequence? My 17 is number 29625 so it is very close to the end of the series I. I guess I need a different grill cause mine has no bars. :(
|
The 3 should be dropped. The black bar grille D17 versions started at S/N 24001 and ran until 31625. That is coming from Terry Dean's AC data book. I just noticed something about the serial numbers in the AC data book. It says:
Series 1 - S/N 1001 to 23363 (22363 made) Series 1 Black Bar Grille - S/N 24001 to 31625 (7625 made) Series 2 - S/N 32001 to 41540 (9540 made) Series 3 - S/N 42001 to 72768 (30768 made) (Seems to be a discrepancy here. Book also states that only 9126 were made but that doesn't add up to the S/N range. Which is correct?) Series 4 - S/N 75001 to 89213 (14213 made)
So are there gaps in the serial numbers when they changed series? It looks like they always started out with a 1, i.e. 32001 or 42001, etc. I didn't realize that.
|
|
http://www.allischalmershistory.com (Work In Progress)
1959 AC Series 1 Black Bar Grille D17 Gas WF
|
|
WD45
Orange Level
Joined: 20 Sep 2009
Location: STAYNER,ONTARIO
Points: 952
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Dec 2011 at 6:04pm |
|
We have a series IV diesel wide front with factory 3 pt. Real sharp tractor.
|
|
Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H
|
|
wheatbreeder
Orange Level
Joined: 12 Sep 2009
Location: Harrow, Ontario
Points: 581
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Dec 2011 at 6:54pm |
the series 4 was the basics for the 170-175
|
|
Farm stuff 8050,6690,175,F2,5050,WD
|
|
allischalmerguy
Orange Level
Joined: 11 Sep 2009
Location: Deep River, IA
Points: 2879
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 May 2018 at 9:13pm |
|
Found this old post on D17 info...Neat info!
|
|
It is great being a disciple of Jesus! 1950 WD, 1957 D17...retired in Iowa,
|
|
Gary
Orange Level Access
Joined: 13 Sep 2009
Location: Peterborough,On
Points: 5463
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 May 2018 at 4:48am |
|
That Chart sure looks a lot like one I made up, and later sent to Gatz in 2007.
Gary
Here is the one I made up:
D-17 Series II Series III Series IV
1957 to 1960 1960 to 1962 1962 to 1964 1964 to 1967
Serial to 31625 32001 to 41540 42001 to 72768 75001 to 89213
>At 19978 - from >Series II designation >Rear brakes changed >3pt hitch or Snap
by-pass type oil filter started when Series III from WD type to a Coupler
to full flow. was introduced. combination band/disc.
> Orange wheels >Cream Wheels > long wide decal Series IV on gas tank
> Silver grille w/black >Cream grille cream background
border,3 black bars >Persian Orange 2 > Series III on gas tank >live hydraulic.
> Persian Orange 1 >Decal - metal - had >pump mounted at
> black decal cream background. >Headlights mounted side pulley location,
on fenders. driven by hollow shaft
>All Series had same >Service manuals don't splined to pressure
gas engine 226 cu.in. refer to a Series I or II > black oval muffler plate.
4" piston 4 1/2" stroke
>Pwr. Str. pump change > 4 spool hydraulic
control valve.
Information from:
> THE ALLIS CHALMERS STORY - C.H. WENDEL Pg. 322, 323, 324
> ALLIS CHALMERS FARM EQUIPMENT 1914 - 1985 NORM SWINFORD Pg.160, 162
> A Guide To Allis-Chalmers Tractors - Norm Swinford Pg.25, 26
> Vintage Allis-Chalmers Tractors - The Ultimate Tribute Lynn K. Grooms Pg. 121, 122, 123
> I & T Shop Manual No. AC-17 Pg. 46, 68, 91
Copy and Paste didn't work so good !
|
|
WD45
Orange Level
Joined: 20 Sep 2009
Location: STAYNER,ONTARIO
Points: 952
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 May 2018 at 7:48am |
My first Allis tractor was a D17 gas that I purchased at a farm auction on Nov 11, 1967 was an early model with out power steering. The bearings went out in the hi low one day combing with the All Crop 90 on the home farm.Also the mix mill was very hard on the engine Dad had a length of twine tied to the throttle to run engine wide open. The manifold and muffler would be cheery red when grinding pig feed with 1/8" screen on a 20" mill. We had an 84 series S/C plow, 13 ft triple K and 12 ft MF disc for this tractor. In 1971 traded for a low hr 180 diesel . What a difference running the mix mill. The 180 was running over 80 pto hp.
|
|
Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H
|
|
Brian G. NY
Orange Level
Joined: 12 Sep 2009
Location: 12194
Points: 2242
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 May 2018 at 3:26pm |
In the upper LH corner where it says "at s/n 19978 from By-pass type oil filter To Full Flow" refers to the "ENGINE" serial number according to the service manual. The parts manual says it started with "Tractor" serial number 24001 which might indicate the relationship between the two numbers at that particular time. The head was changed to accept the 3/4" reach plugs at "ENGINE" serial number 17293.
Skyhighballoon (MO) posted on here once that the heavier WFE was introduced beginning with serial number 38136. My D-17 serial number 34633 definitely has the lighter WFE!
|
|
Brian G. NY
Orange Level
Joined: 12 Sep 2009
Location: 12194
Points: 2242
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 May 2018 at 3:35pm |
I'm sure there were other subtle "Running Changes" during the span of the D-17's life.
eg: From the service manual......"Effective with tractor serial number D-17-24001 all brake linkage and shoes were made heavier to eliminate linkage from springing, causing a spongy feel on brake pedals".
|
|
JC-WI
Orange Level Access
Joined: 11 Sep 2009
Location: wisconsin
Points: 33843
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 May 2018 at 8:09am |
|
Speaking of the wide front ends,
Were the series IV D17 wide front the same as on a 170?
I have seen mostly 5 bolt and some 6 bolt hubs on the series IV, while I have seen some 5 bolt but mostly 6 bolt hubs on the 170. I am not speaking of the wide front that went forward like on the later 170/175.
|
|
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20746
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 May 2018 at 9:10am |
|
Wide front axle cross tube on a One-Seventy was different than any D-17. The D-17 was rounded on all four corners, while the One-Seventy was squared off on the bottom edges. Don't think there was ever a 5 bolt front hub on any One-Seventy.
|
|
