This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
1982 ALLIS CHALMERS - 7010-592042 |
Post Reply |
Author | |
SMRDIESEL
Bronze Level Joined: 22 Jul 2024 Location: alberta Points: 5 |
Post Options
Thanks(0)
Posted: 22 Jul 2024 at 1:54pm |
Can Someone help me with the Diagram or how the clutch return spring works?
the clutch pedal is all the way down. it's a hydraulic clutch and there is a lever on the right side. i push that lever and the clutch pedal returns to the top. does the tractor need to be running in order for hydraulics to kick in and push the piston back ?
|
|
Sponsored Links | |
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20543 |
Post Options
Thanks(1)
|
There is a clutch pedal return spring above the clutch pedal inside the instrument panel. The left orange colored panel must be removed to access it, after removing the lower black or brown panel first.
|
|
SMRDIESEL
Bronze Level Joined: 22 Jul 2024 Location: alberta Points: 5 |
Post Options
Thanks(0)
|
So the clutch return spring would hold the pedal up and keep the piston pushed in?
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20543 |
Post Options
Thanks(0)
|
Yup. They break these return springs. Nothing new.
|
|
SMRDIESEL
Bronze Level Joined: 22 Jul 2024 Location: alberta Points: 5 |
Post Options
Thanks(0)
|
this is the lever i am talking about
|
|
SMRDIESEL
Bronze Level Joined: 22 Jul 2024 Location: alberta Points: 5 |
Post Options
Thanks(0)
|
we have to take the cab off to replace the return spring?
would you have the instructions? i really appriciate your help!
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20543 |
Post Options
Thanks(1)
|
I never said anything about removing the cab. Remove both left and right hoods. Remove the short rear center top hood by releasing the spring hooks. Standing on the ground, open the cab door. Remove the metal strip holding down the floor mat and roll the floor mat back under the seat. Remove the black side panel that is straight in front of you. Remove some of the bolts to the black panel above the steering wheel tilt release. Now, your goal is to remove the LEFT orange side panel above the clutch pedal. This takes more bolt removal and probably another top panel to the instrument panel. The broken spring is inside that orange panel and above the clutch pedal.
Edited by DrAllis - 22 Jul 2024 at 6:06pm |
|
DougG
Orange Level Joined: 20 Sep 2009 Location: Mo Points: 8110 |
Post Options
Thanks(0)
|
How does info that was straight forward - replacing a spring- turn into taking the cab off ETC,,,, maybe I missed something, geesh
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |