This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Allis chalmers 715c hydraulic pump |
Post Reply |
Author | |
ac89
Silver Level Joined: 18 Mar 2015 Location: maine Points: 325 |
Post Options
Thanks(0)
Posted: 26 Aug 2020 at 2:44pm |
Can you still get a hydraulic pump for the allis chalmers 715c backhoe with the allis chalmers 433t motor? Or will my best bet be my hydraulic shop for a rebuild. I think its a Cessna pump.
Edited by ac89 - 26 Aug 2020 at 2:44pm |
|
Sponsored Links | |
DMiller
Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 29479 |
Post Options
Thanks(0)
|
Hydraulic shop will be your best bet, if need a Eaton Cessna they tend to still be available just have to match specs and drive spline.
|
|
ac89
Silver Level Joined: 18 Mar 2015 Location: maine Points: 325 |
Post Options
Thanks(0)
|
That's what Im thinking. It'll be a good project for this winter.
Edited by ac89 - 26 Aug 2020 at 4:02pm |
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41195 |
Post Options
Thanks(0)
|
I had a Cessna pump on a New Holland skid steer that went bad was over $1,000 from dealer - hyd shop had a new pump for $300 but input shaft was different as NH had a propitiatory design - thing is old shaft was good and fit right into new pump - did the exchange of shaft in the price .
Check with a shop or with MINNPAR to see if they have it in stock but be ready for $$$. Can try Surplus Center to see what they have that might exchange also as they can match many units for pumps and cylinders |
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
ac89
Silver Level Joined: 18 Mar 2015 Location: maine Points: 325 |
Post Options
Thanks(0)
|
Ok I will have to look into that thanks
|
|
ac89
Silver Level Joined: 18 Mar 2015 Location: maine Points: 325 |
Post Options
Thanks(0)
|
I found a pump online that is identical on the outside of mine. But it doesn't tell me the specs.
|
|
DMiller
Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 29479 |
Post Options
Thanks(0)
|
Almost looks like the trans pump for my 7G
Can go to Eaton Cessna and look up by pump number for specs.
Edited by DMiller - 31 Aug 2020 at 3:10pm |
|
ac89
Silver Level Joined: 18 Mar 2015 Location: maine Points: 325 |
Post Options
Thanks(0)
|
I'll try that thanks
|
|
markjlemmon
Bronze Level Joined: 11 Sep 2020 Location: Fresno, CA Points: 2 |
Post Options
Thanks(0)
|
Hi, This is Mark.
A 715c hydraulic pump can handle fluids that are too viscous for a centrifugal pump. The pumping action is very controllable and mathematical. if you double the speed, you double the output. |
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41195 |
Post Options
Thanks(0)
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |