Honda van engine tools

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   So I was talked into helping the neighbor moonlight in his shop. His daughter took the 2005???? 2008??? I can't remember it don't matter, Honda Odyssey van to the dealer for a timing belt. Well the dealer performed the service and messed up on something because once the motor started they had terrible sounds and now a big miss. I knew right away they bent some valves. So I went to help fix this van. We have it apart and the heads will go in to the machine shop this week. 

Any way I got to doing some research on different things and I found a few specialty tools that I think I may need. For example the heavy wall socket for the crank shaft bolt. I also see people brag up the valve lash combination screwdriver/socket tool used to assist in getting the lash set. 

But my main interest is in buying a cam gear holding tool. When this head goes to the machine shop he's going to want everything out of the head that's not relevant to his job. So I need a way to hold the gear when I go to tighten the nut. What do yo guys suggest. I see all kinds of choices. I kind of like the otc universal tool that is adjustable and comes with different size interchangeable pins. 

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
bobkyllo Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 14 Sep 2009 Location: minnesota Points: 1547	Post Options Post Reply Quote bobkyllo Report Post Thanks(0) Quote Reply Topic: Honda van engine tools Posted: 26 Jan 2020 at 10:27pm
	So I was talked into helping the neighbor moonlight in his shop. His daughter took the 2005???? 2008??? I can't remember it don't matter, Honda Odyssey van to the dealer for a timing belt. Well the dealer performed the service and messed up on something because once the motor started they had terrible sounds and now a big miss. I knew right away they bent some valves. So I went to help fix this van. We have it apart and the heads will go in to the machine shop this week. Any way I got to doing some research on different things and I found a few specialty tools that I think I may need. For example the heavy wall socket for the crank shaft bolt. I also see people brag up the valve lash combination screwdriver/socket tool used to assist in getting the lash set. But my main interest is in buying a cam gear holding tool. When this head goes to the machine shop he's going to want everything out of the head that's not relevant to his job. So I need a way to hold the gear when I go to tighten the nut. What do yo guys suggest. I see all kinds of choices. I kind of like the otc universal tool that is adjustable and comes with different size interchangeable pins.

Sponsored Links

Walker Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Location: oh Points: 8416	Post Options Post Reply Quote Walker Report Post Thanks(0) Quote Reply Posted: 26 Jan 2020 at 10:55pm
	Strap wrench.

jaybmiller Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 22453	Post Options Post Reply Quote jaybmiller Report Post Thanks(0) Quote Reply Posted: 27 Jan 2020 at 4:38pm
	um.... Well the dealer performed the service and messed up on something WHY isn't the dealer FIXING it ???? UNDER WARRANTY ????
	3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water

john(MI) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 Sep 2009 Location: SE MI Points: 9262	Post Options Post Reply Quote john(MI) Report Post Thanks(0) Quote Reply Posted: 27 Jan 2020 at 5:09pm
	If the dealer didn't fix it I'd be finding a lawyer! As for the gear, what torque are you looking at? Wouldn't an impact get it tight enough, but a strap wrench would work too. If you're putting a new chain on it then use the old chain to make a wrench with a pair if vise grips or something.
	D14, D17, 5020, 612H, CASE 446

bobkyllo Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 14 Sep 2009 Location: minnesota Points: 1547	Post Options Post Reply Quote bobkyllo Report Post Thanks(0) Quote Reply Posted: 27 Jan 2020 at 8:40pm
	I'm not sure why the dealer was cut out of the picture. I know there owner is far from happy with the dealer. The guy I'm working for is 55 years of age. This van belonged to his daughter. I never really got into why the dealer isn't picking up the tab here. Ive asked questions and never got a real decent answer. Plus he said the daughter was going to take care of it. I don't know I was just happy to get the evening cash job plus he's buying me the tools I need. So as I see it cash money, tools, food, and drinks all in exchange for fixing the car. Heck yeah I'm not going to poke the sleeping bear

HD6GTOM Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 30 Nov 2009 Location: MADISON CO IA Points: 6627	Post Options Post Reply Quote HD6GTOM Report Post Thanks(0) Quote Reply Posted: 28 Jan 2020 at 12:04am
	Good luck with it.

steve(ill) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81106	Post Options Post Reply Quote steve(ill) Report Post Thanks(0) Quote Reply Posted: 28 Jan 2020 at 7:11am
	BOb, I have not used the cam holder tool, but I know a lot of the guys that do work on double cam motors have the OTC tool.. You have to hold everything in the right position when the chain and tensioners are installed and vice grips or pipe wrench don't work. If its a single cam motor, maybe not a big deal. We use to rebuild Honda over head motor cycle engines ( single cam) all the time without a tool.
	Like them all, but love the "B"s.