This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Dropped bolt into wet clutch housing |
Post Reply |
Author | |
Leop
Silver Level Joined: 03 Dec 2018 Location: California Points: 161 |
Post Options
Thanks(0)
Posted: 09 Nov 2019 at 6:28pm |
Well one of the bolts that holds the locking tab for adjustment of my wet clutch is missing. Must have backed out when i bumped the motor over. Only three or four threads were engaged.
I looked at the parts manual but i can't see if there is a screen between the clutch housing and the oil sump. Thinking that maybe i can snake my hand in through the access hatch for the oil reservoir over to the bottom of the housing and grab the bolt. Any better ideas. Leo |
|
Sponsored Links | |
DMiller
Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 29569 |
Post Options
Thanks(0)
|
Old trick, Magnet tied to a Speedometer cable or something as flexible. I use a mechanical fingers tool with a magnet firmly taped to the head, flexible but stiff enough to get where needed.
|
|
Leop
Silver Level Joined: 03 Dec 2018 Location: California Points: 161 |
Post Options
Thanks(0)
|
I tried that first and can't seem to catch it. Plus the magnet keeps sticking to other stuff. Feels like pushing a wet noodle.
I'll try somthing stiffer like a spedo cable though! |
|
Leop
Silver Level Joined: 03 Dec 2018 Location: California Points: 161 |
Post Options
Thanks(0)
|
Well,
For those that are interested I can verify that you are able to take off the plate that holds the pickup for the wet clutch sump and reach your hand into the sump where you can then curl your fingers maybe an inch or two into the flywheel housing. However this will not leave you with much confidence that what you seek to find is or is not there. If you have a seven year old (which I do) and are able to convince the little tike to reach his hand into the sump and then into the flywheel housing then you can get much further in to search. The important part of the above described procedure is to wash said kid's hands, arms, and elbows before be runs into the house, oil flying everywhere, and tugs on mom's favorite dress with his oily hands to tell her that he had lots of fun "doing dangerous stuff" with dad. I was not successful with this last step If both seven year old and father are not sucesfull in locating the lost nut then go to the box where you have been keeping all the bolts you removed in the course of the job and check it one more time. In my case this was the solution. ...stupid..Gd...forsaken...son...of...a.......tractor............... Thanks for all the good ideas guys. Leo Edited by Leop - 11 Nov 2019 at 6:09pm |
|
DanWi
Orange Level Access Joined: 18 Sep 2009 Location: wttn Points: 1705 |
Post Options
Thanks(0)
|
Boys will be boys having fun getting dirty.
|
|
Leop
Silver Level Joined: 03 Dec 2018 Location: California Points: 161 |
Post Options
Thanks(0)
|
Dan, are you talking about me, or my son ?
|
|
TramwayGuy
Orange Level Access Joined: 19 Jan 2010 Location: Northern NY Points: 11221 |
Post Options
Thanks(0)
|
When I was a young lad, I was the one who got to replace the shear bolt on the IH 45-T hay baler, simply because my hand would go in to where the bolt went.
I can relate. |
|
Ray54
Orange Level Access Joined: 22 Nov 2009 Location: Paso Robles, Ca Points: 4367 |
Post Options
Thanks(0)
|
You could of started with cute little girl in pink. My Wonderful had a bit of sympathy as she had been her grandfathers little helper,but not that much. I heard about for years.
|
|
Leop
Silver Level Joined: 03 Dec 2018 Location: California Points: 161 |
Post Options
Thanks(0)
|
Good for you Ray.
Pink or Blue, I am fairly sure that sticking both hands into a vat of used motor oil and then running into the house is a kids dream come true. Why should little girls miss out on all the fun? |
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41211 |
Post Options
Thanks(0)
|
Took me a couple years to brake my son into working in shop - he liked hanging out there but when I asked to get something he would say NO IT'S DIRTY - Mom doesn't want me to get dirty --- learned matho out in shop also get me the wrench withthe 7 line and 16 on it , now get me the socket with the 3 and 4 from the 3rd drawer
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
DMiller
Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 29569 |
Post Options
Thanks(0)
|
Helped raise neighbor's daughter years ago, she became a School Trained Mechanic. Did not stick with it though as health issues knocked her down but still carpenters with the big boys. Her Mom and Dad never did forgive me for her First ever Mickey Ds happy meal or getting her filthy work helping on my old machines.
|
|
Dusty MI
Orange Level Joined: 13 Sep 2009 Location: Charlotte, Mi Points: 5053 |
Post Options
Thanks(0)
|
Back in the 50's our neighbor was combining for us with his tow behind green machine. He had a son that was a year or so younger than me, but I was the one that crawled inside that green thing to insert a bolt.
Dusty
|
|
917 H, '48 G, '65 D-10 series III "Allis Express"
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |