This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
620/720 AC 48" rototiller drag plate |
Post Reply |
Author | |
macvette
Orange Level Joined: 13 Jun 2011 Location: nekoosa, wi Points: 1656 |
Post Options
Thanks(0)
Posted: 20 Jan 2017 at 5:06pm |
I edited my post to show the size on my tiller, but figured I should post separately as well.
Size is 48 1/2 inches long by 9 inches wide. A lighter chain is welded near rear center that will reach the little hook on the gearbox to adjust how far down you wish to hang the drag plate. Merle |
|
Sponsored Links | |
ac720nut
Orange Level Joined: 09 Feb 2016 Location: Dexter Mi Points: 1217 |
Post Options
Thanks(0)
|
Thanks Merle, mine I guess got bent by po and he never bothered to straighten. I'll get one cut so thanks again
Edited by ac720nut - 21 Jan 2017 at 5:11am |
|
macvette
Orange Level Joined: 13 Jun 2011 Location: nekoosa, wi Points: 1656 |
Post Options
Thanks(0)
|
You're welcome.
|
|
coggonobrien
Orange Level Access Joined: 14 Nov 2010 Location: Eastern Iowa Points: 1816 |
Post Options
Thanks(0)
|
anybody got pictures? Is it flat or formed?
|
|
ac720nut
Orange Level Joined: 09 Feb 2016 Location: Dexter Mi Points: 1217 |
Post Options
Thanks(0)
|
the ones I've seen are flat with a angle on end , I believe to keep from digging in when you back up. At least that will be the way I build mine.
Merle do you have pictures?
Edited by ac720nut - 23 Jan 2017 at 5:41pm |
|
macvette
Orange Level Joined: 13 Jun 2011 Location: nekoosa, wi Points: 1656 |
Post Options
Thanks(0)
|
No pictures, but mine is probably a re-made plate, as the hinges are the regular gate hinges. It is completely flat, but I don't know how much difference a bend up would make because in my sandy soil, the tiller completely pulverizes the soil, and the plate just drags it smooth.
An upward bend on the rear edge may make a difference in different types of soil.
|
|
ac720nut
Orange Level Joined: 09 Feb 2016 Location: Dexter Mi Points: 1217 |
Post Options
Thanks(0)
|
The one I looked at had a tube full length and rod for hinge
and about a 45* angle on edge
|
|
AC720Man
Orange Level Joined: 10 Oct 2016 Location: Shenandoah, Va Points: 4873 |
Post Options
Thanks(0)
|
I just saw this post, I will take a picture tomorrow of mine, it's a factory piece.
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
Gary
Orange Level Access Joined: 13 Sep 2009 Location: Peterborough,On Points: 5326 |
Post Options
Thanks(0)
|
Link to 'SimpleTrACtors website. Rear View of 720 Roto Tiller. Gary http://www.simpletractors.net/models/700_series/rotary_tiller.htm ................................................... Edited by Gary - 02 Mar 2017 at 4:25am |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |