This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
onan picture request |
Post Reply |
Author | |
coggonobrien
Orange Level Access Joined: 14 Nov 2010 Location: Eastern Iowa Points: 1819 |
Post Options
Thanks(0)
Posted: 08 Apr 2016 at 6:56pm |
I lost the pictures I took before I pulled my engine. Can I get pictures of how ccka throttle and choke cable are hooked up and routed on top of the engine. Thanks
|
|
Sponsored Links | |
HudCo
Orange Level Joined: 29 Jan 2013 Location: Plymouth Utah Points: 3536 |
Post Options
Thanks(0)
|
dont know if mine is correct from the factory but i think it is will try to get pic tommorrow
|
|
coggonobrien
Orange Level Access Joined: 14 Nov 2010 Location: Eastern Iowa Points: 1819 |
Post Options
Thanks(0)
|
that would be awesome Hud, thanks
|
|
coggonobrien
Orange Level Access Joined: 14 Nov 2010 Location: Eastern Iowa Points: 1819 |
Post Options
Thanks(0)
|
Any luck Hud?
|
|
HudCo
Orange Level Joined: 29 Jan 2013 Location: Plymouth Utah Points: 3536 |
Post Options
Thanks(0)
|
got the pics to my e-mail will work on getting them on here hate to say it but it is a several hour trial and error prosess for my to do these kind of computer things
|
|
coggonobrien
Orange Level Access Joined: 14 Nov 2010 Location: Eastern Iowa Points: 1819 |
Post Options
Thanks(0)
|
if you want to email me them at coggonobrien@gmail.com i can post them up for other peoples reference
|
|
coggonobrien
Orange Level Access Joined: 14 Nov 2010 Location: Eastern Iowa Points: 1819 |
Post Options
Thanks(0)
|
Hud, not sure if you got my email or not but I received the pictures. Is it possible to get a higher resolution picture without the air cleaner emailed directly to me? I need to see how the cables connect to the carb
Thanks
|
|
HudCo
Orange Level Joined: 29 Jan 2013 Location: Plymouth Utah Points: 3536 |
Post Options
Thanks(0)
|
i will get some new pictures the next time the sun is out took those with one of those apple smart phones but the pictures never turn out well unless its in full sunlight
|
|
coggonobrien
Orange Level Access Joined: 14 Nov 2010 Location: Eastern Iowa Points: 1819 |
Post Options
Thanks(0)
|
thanks hud, i'll pm you my cell number so you can just send them direct. Tractor looks pretty mean with duals and a blade
|
|
coggonobrien
Orange Level Access Joined: 14 Nov 2010 Location: Eastern Iowa Points: 1819 |
Post Options
Thanks(0)
|
Hud if you can also show me how the 2 cables are anchored to the sheet metal that would be great too.
Thanks!
|
|
Les Royer
Orange Level Joined: 25 Dec 2014 Location: Carson, Iowa Points: 5593 |
Post Options
Thanks(0)
|
Actually, I just went through this same ordeal yesterday. But it's on a JOHN DEERE 420. Would that help?
I know what the correct routing is and it would be easier for me to be able to send the pictures to your phone, so PM me if you still need em. I'll be on later tonight. Edited by Les Royer - 17 Apr 2016 at 9:24pm |
|
I still gots my A/C but it's clear out in the barn now.
|
|
Les Royer
Orange Level Joined: 25 Dec 2014 Location: Carson, Iowa Points: 5593 |
Post Options
Thanks(0)
|
But it's actually quite simple really. And when I tell ya, yer gonna go well heil. Why couldn't I see that? Cause that's exactly what I did. had to go through about an hour on the dang computer before I found sum pickshure showing the correct routing.
But here's how it goes on my JOHN DEERE 420. The choke cable goes through the firewall. If ya look at the firewall from the front, I got 4 holes left to right. The choke cable goes in the 2nd hole from the right. Now this is looking at it from the front, ok? And thar should be a grommet in the hole. If thars not, you need sumthin around the cable to protect it from thet sharp steel. I just bought the grommet. From thare it goes across the top of the motor and around the dipstick tube and into the cable holding bracket from the front of the tractor. I hope you got the heat sheilding there otherwise yer cable be riding on the muffler. And it ain't gonna last very long if ya leave it that way. The throttle cable goes from the lever around the OUTSIDE of the firewall and into the govenor linkage. so it's positioned between the firewall and the side panel. |
|
I still gots my A/C but it's clear out in the barn now.
|
|
HudCo
Orange Level Joined: 29 Jan 2013 Location: Plymouth Utah Points: 3536 |
Post Options
Thanks(0)
|
fabbed all the mounts and blade brackets from a little help from all you guys out there
|
|
coggonobrien
Orange Level Access Joined: 14 Nov 2010 Location: Eastern Iowa Points: 1819 |
Post Options
Thanks(0)
|
coggonobrien
Orange Level Access Joined: 14 Nov 2010 Location: Eastern Iowa Points: 1819 |
Post Options
Thanks(0)
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |