| Author |
 Topic Search  Topic Options
|
ratchet 
Silver Level
Joined: 16 Jul 2012
Location: texas
Points: 51
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: HD6G TOOLS
Posted: 23 Aug 2012 at 1:09pm |
TWO OF THE FIVE TOOLS I HAVE MADE SO FAR FOR THIS MACHINE   II WILL POST THE OTHERS LATER.
|
|
1956 HD6G , 1958 HD6G , 1963 HD6G,massey harris 20,case 995,huber,jd 350 , 1956 onan generator,poppin jonny ,massey ferguson, internatinal backhoe, i work on anything and everything its an addiction!!
|
 |
|
Sponsored Links
|
|
|
Dozer
Orange Level
Joined: 16 Aug 2011
Location: SW New York
Points: 689
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Aug 2012 at 3:46pm |
|
Tools that do the job. That track pin looks to be in excellent shape. What do you use to pull track pins wityh the track on the machine?
|
|
Coke-in-MN
Orange Level Access
Joined: 12 Sep 2009
Location: Afton MN
Points: 41549
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Aug 2012 at 5:19pm |
A ( B F H ) and a punch . Punch has a handle on it so as to hold steady by helper while you use hammer . You can make up a sleeve to center punch onto the track pin , this bolts to the track link so punch does not need to be located after each hit. On the pin (opposite side your driving from , buck the track link with a pipe or heavy metal bar to opposite track so hit is solid and not bouncing when force is applied.
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
|
ratchet
Silver Level
Joined: 16 Jul 2012
Location: texas
Points: 51
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Aug 2012 at 8:04am |
Dozer, The hard way like coke said a BFH! actually with a oxy acethylene torch to heat it also. Coke thanks for the idea i will be placing a piece of pipe on my track assembly tool to incorporate taking it off also. Here are two other tools i built for it. one is for the 4 inch nut on the center of the drive sproket and the other is used with a bottle jack to pull the outboard bearing.  
|
|
1956 HD6G , 1958 HD6G , 1963 HD6G,massey harris 20,case 995,huber,jd 350 , 1956 onan generator,poppin jonny ,massey ferguson, internatinal backhoe, i work on anything and everything its an addiction!!
|
|
dadsdozerhd5b
Orange Level
Joined: 27 Sep 2009
Location: lansdale pa.
Points: 527
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Aug 2012 at 8:18pm |
|
by the looks of the weld on the track frame on the last pic that sprocket was changed without removing the trackframe. coke has talked about this before. nice tools, i like the pin lineup tool. we meed some pics of the whole nicely painted loader though.
|
|
HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE.
|
|
ratchet
Silver Level
Joined: 16 Jul 2012
Location: texas
Points: 51
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Aug 2012 at 11:37am |
|
Yea that is where I got the idea after several hours of messing with the pin on the track frame I went that way it seems to work pretty good , I've put the outboard bearing on after I welded it all back up and it was aligned pretty good no problems I will post a pic of the bracket I bolted up for alignment later.
|
|
1956 HD6G , 1958 HD6G , 1963 HD6G,massey harris 20,case 995,huber,jd 350 , 1956 onan generator,poppin jonny ,massey ferguson, internatinal backhoe, i work on anything and everything its an addiction!!
|
|
