This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
WD shift problem |
Post Reply |
Author | |
wva1980
Silver Level Joined: 19 Jan 2012 Location: W Va Points: 79 |
Post Options
Thanks(0)
Posted: 28 May 2012 at 2:20am |
This is a similar problem to what has recently been a WD45 topic. My transmission was stuck in reverse because the shift lever (WD straight) had become disengaged from the shift rods. I've taken the lever off and looked at everything. There is no unusual wear to my untrained eye. We lined everything up and put it back together. The shift lever has about 1/4 inch vertical (up/down) movement. The pivot pin doesn't keep the lever from rotating unless the lever is pulled all the way up. My pivot washer is just a small metal piece, should it be rubber lined? Is the bottom of the transmission cover wore were the shift lever ball rides? I have an extra cover that I got off of ebay. It has the shift rods, but no lever. I didn't think to try my lever in it. Should I? Any and all help is greatly appreciated.
|
|
Sponsored Links | |
MACK
Orange Level Joined: 17 Nov 2009 Points: 7664 |
Post Options
Thanks(0)
|
If the lever rotates it will slide between the notches below. Sounds like it is time to replace the gear shift and rebuild the pivot pin holes with over size pins. MACK
|
|
norm[ind]
Orange Level Joined: 29 Oct 2010 Location: bourbon,ind Points: 2992 |
Post Options
Thanks(0)
|
it needs the pin installed corretly with no up -down play [with a new washer and snap ring]
if play still is there can install some bushings to take up play have repaired many 1-574-342-4545 for more info
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |