| Author |
 Topic Search  Topic Options
|
Kforeal 
Bronze Level
Joined: 29 Jan 2012
Location: New York
Points: 16
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: CA hydraulics
Posted: 27 Feb 2012 at 6:27am |
|
Did the CA come with one or two hydraulic rams for the rear? Mine has one but I'm seeing pics with two.
|
 |
|
Sponsored Links
|
|
|
DennisA (IL)
Orange Level
Joined: 11 Sep 2009
Location: Ridott IL.
Points: 2064
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Feb 2012 at 6:51am |
|
They came with two rams, one on each side.
|
|
Thanks & God Bless
Dennis
|
|
DanD
Orange Level
Joined: 11 Sep 2009
Location: WI
Points: 856
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Feb 2012 at 9:14am |
|
You have to have two rams when you use, for example, the cultivator. One ram lifts the rear, and the other lifts the front. Then, you adjust the pump so that the front lifts and lowers first as you operate the pump control.
|
|
GregLawlerMinn
Orange Level
Joined: 11 Sep 2009
Location: Lawler, Mn
Points: 1226
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Feb 2012 at 3:24pm |
|
Yeep two cylinders came standard. Perhaps somewhere along the line your CA had a woods mower under it. The mower needs only 1 cylinder to raise/lower it and the other cylinder may have been removed.
|
|
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC
|
|
Kforeal
Bronze Level
Joined: 29 Jan 2012
Location: New York
Points: 16
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Feb 2012 at 5:51pm |
|
Yes Greg that's exactly it. Im going to have to locate another ram as I don't plan on using the mower so much. I'd like to get the 3 point set up. Light duty. Thanks fellas
|
|
Kforeal
Bronze Level
Joined: 29 Jan 2012
Location: New York
Points: 16
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Feb 2012 at 7:14pm |
|
Anyone have pics of how the two rams are connected and plumbed?
|
|
Dakota Dave
Orange Level
Joined: 12 Sep 2009
Location: ND
Points: 3971
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Feb 2012 at 7:47pm |
|
the junction block is under the platform just to the left of the lower shock mount. You cant see it with the platform on. the two ram hoses come off the sides and the remote hookup comes up through the hole in the platform. It will still lift a three point with only one ram installed. with both rams installed it will lift way more than the front end will hold down. there is a good drawing in the parts manual. go to agcoparts and look under heritage line.
|
|
