Allis 210 for sale

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   For Sale Allis Chalmers 210 S/N 1773D
This tractor has somewhere around 4500 hours and is in good mechanical shape.
Everything on the tractor I have used and in good working repair. 2 hyd. Remotes and 3 point hitch and 1000 rpm pto.   I am the third owner of the tractor and I bought it off of a farmer who bought it when it was one year old.
The former owner had the radiator replaced engine rebuilt new turbo and the fuel pump rebuilt all with the last 1000 hours.  Since I have owned it we have put in a new 6 button clutch pilot and throw out bearings, replaced all the worn gears in the 4 speed gear box  and a couple of bearings.  We installed a 220 FWA low range so the tractor has a good selection of field gears.
3^rd is 5mph, 4^th 6 mph, and 5^th is 7mph at full throttle.  
The tractor has 10 AC front end weights and bracket off of a 7060.  It has Good Year 18.4 38 R radial tires with about 70% tread.  The duals I believe are the original tires for the tractor and hold air and have 20% tread.  The fronts are 4 ribbed tires 50% tread. 
I removed the remainder of the old cab and learned my first lesson on AC. as I went to the salvage yard to buy what they said were 210 fenders I brought home D 21 fenders.  They do fit the tractor very well.  One of the more unique things about this tractor is that the air cleaner does not go through the hood.  Some of the other things new on the tractor since I have owned it is: seat, fuel gauge, instrument cluster gauges, correct alternator with tachometer drive, batteries, electric fuel pump, a full set of halogen field lights, flashers lights, fuse block and a lot of wiring and lots of little things.   I also have a full set of decals for the tractor after it gets repainted.  Which I have gotten the bugs worked out of it and it is now ready for.  This is a great old tractor that I don’t really want to get rid of. However, I want to move up to a tractor with a real cab tractor, that the cab is not deafening loud and has heat and A/C.  Primary reason for the cab is side dressing NH3. This tractor is very strong as I just finished up my fall tillage this past week pulling a 9 shank Krause disk chisel 8” deep in 5^th gear with out any troubles.  My friend with a CIH 8940 pulled it at the same depth and speed as I did, until traction became an issue.  (He had a lot more) With my current job and family commitments I do not have the time to give the old girl the kind of attention she needs to finish up the restoration with a quality paint job she deserves.  I can deliver the tractor for free with in a 75 mile radius of Ladoga Indiana.  I will sell the tractor for $10,000.  Please call me if you would like to know more about it or come and see it.
765.918.3673
I will post some pictures as soon as I get them to size.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
zrt800 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 25 Sep 2009 Location: Ladoga Points: 12	Post Options Post Reply Quote zrt800 Report Post Thanks(0) Quote Reply Topic: Allis 210 for sale Posted: 22 Nov 2009 at 9:00pm
	For Sale Allis Chalmers 210 S/N 1773D This tractor has somewhere around 4500 hours and is in good mechanical shape. Everything on the tractor I have used and in good working repair. 2 hyd. Remotes and 3 point hitch and 1000 rpm pto. I am the third owner of the tractor and I bought it off of a farmer who bought it when it was one year old. The former owner had the radiator replaced engine rebuilt new turbo and the fuel pump rebuilt all with the last 1000 hours. Since I have owned it we have put in a new 6 button clutch pilot and throw out bearings, replaced all the worn gears in the 4 speed gear box and a couple of bearings. We installed a 220 FWA low range so the tractor has a good selection of field gears. 3^rd is 5mph, 4^th 6 mph, and 5^th is 7mph at full throttle. The tractor has 10 AC front end weights and bracket off of a 7060. It has Good Year 18.4 38 R radial tires with about 70% tread. The duals I believe are the original tires for the tractor and hold air and have 20% tread. The fronts are 4 ribbed tires 50% tread. I removed the remainder of the old cab and learned my first lesson on AC. as I went to the salvage yard to buy what they said were 210 fenders I brought home D 21 fenders. They do fit the tractor very well. One of the more unique things about this tractor is that the air cleaner does not go through the hood. Some of the other things new on the tractor since I have owned it is: seat, fuel gauge, instrument cluster gauges, correct alternator with tachometer drive, batteries, electric fuel pump, a full set of halogen field lights, flashers lights, fuse block and a lot of wiring and lots of little things. I also have a full set of decals for the tractor after it gets repainted. Which I have gotten the bugs worked out of it and it is now ready for. This is a great old tractor that I don’t really want to get rid of. However, I want to move up to a tractor with a real cab tractor, that the cab is not deafening loud and has heat and A/C. Primary reason for the cab is side dressing NH3. This tractor is very strong as I just finished up my fall tillage this past week pulling a 9 shank Krause disk chisel 8” deep in 5^th gear with out any troubles. My friend with a CIH 8940 pulled it at the same depth and speed as I did, until traction became an issue. (He had a lot more) With my current job and family commitments I do not have the time to give the old girl the kind of attention she needs to finish up the restoration with a quality paint job she deserves. I can deliver the tractor for free with in a 75 mile radius of Ladoga Indiana. I will sell the tractor for $10,000. Please call me if you would like to know more about it or come and see it. 765.918.3673 I will post some pictures as soon as I get them to size.

Sponsored Links

zrt800 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 25 Sep 2009 Location: Ladoga Points: 12	Post Options Post Reply Quote zrt800 Report Post Thanks(0) Quote Reply Posted: 22 Nov 2009 at 9:10pm


zrt800 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 25 Sep 2009 Location: Ladoga Points: 12	Post Options Post Reply Quote zrt800 Report Post Thanks(0) Quote Reply Posted: 22 Nov 2009 at 9:11pm


zrt800 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 25 Sep 2009 Location: Ladoga Points: 12	Post Options Post Reply Quote zrt800 Report Post Thanks(0) Quote Reply Posted: 22 Nov 2009 at 9:11pm


zrt800 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 25 Sep 2009 Location: Ladoga Points: 12	Post Options Post Reply Quote zrt800 Report Post Thanks(0) Quote Reply Posted: 22 Nov 2009 at 9:12pm


zrt800 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 25 Sep 2009 Location: Ladoga Points: 12	Post Options Post Reply Quote zrt800 Report Post Thanks(0) Quote Reply Posted: 22 Nov 2009 at 9:13pm


redline Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Collins, IA Points: 1013	Post Options Post Reply Quote redline Report Post Thanks(0) Quote Reply Posted: 22 Nov 2009 at 9:22pm
	Where is the antenna for your guidance system? I use one of the EZ Steer systems with the older light bar, it works surprisingly well. That is a good looking 210. Somebody is going to be happy to give her a new home.
	If it weren't for the last minute, I wouldn't get anything done!

zrt800 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 25 Sep 2009 Location: Ladoga Points: 12	Post Options Post Reply Quote zrt800 Report Post Thanks(0) Quote Reply Posted: 22 Nov 2009 at 9:43pm
	It was on the front of the food above the front tires. That actual set up was EZ steer RTK cellular using my blackberry and a laptop. Normally I put the antenna on the front of the cab. Not an option on this tractor.

zrt800 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 25 Sep 2009 Location: Ladoga Points: 12	Post Options Post Reply Quote zrt800 Report Post Thanks(0) Quote Reply Posted: 26 Mar 2010 at 9:45pm
	I posted my Allis 210 a few months ago. anyone interested in buying it for $9500. I just put it on tractor house. It should be on there site Monday.