Loader for D-17

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I just bought a D-17 (Series II) and there is a New Idea bucket loader that comes with it that has been sittin' out in the weeds for quite a few years.
The hydraulic hoses that feed the rams connect to the shaft rather than the cylinder.
There are two hoses to each ram so I assume they are "two-way" rams.
I've never seen anything like that before; anybody else? If they are truly "two-way", I assume there must be two ports in the shaft, one on the upper side of the piston and one on the lower side and two separate holes down the length of the shaft to feed them?
I haven't gotten the stuff home yet and I only took a cursory look at the loader but the hose location struck me as unusual, to say the least.
It also comes with  a set of 3-bottom plows that look to be in nice shape. They have the guide wheel on them like the ones discussed on here not too long ago. I had never seen that before and now I end up with a set; funny how things work out some times.
I may be looking to sell the plows.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Brian G. NY Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 Sep 2009 Location: 12194 Points: 2242	Post Options Post Reply Quote Brian G. NY Report Post Thanks(0) Quote Reply Topic: Loader for D-17 Posted: 20 Nov 2009 at 9:45pm
	I just bought a D-17 (Series II) and there is a New Idea bucket loader that comes with it that has been sittin' out in the weeds for quite a few years. The hydraulic hoses that feed the rams connect to the shaft rather than the cylinder. There are two hoses to each ram so I assume they are "two-way" rams. I've never seen anything like that before; anybody else? If they are truly "two-way", I assume there must be two ports in the shaft, one on the upper side of the piston and one on the lower side and two separate holes down the length of the shaft to feed them? I haven't gotten the stuff home yet and I only took a cursory look at the loader but the hose location struck me as unusual, to say the least. It also comes with a set of 3-bottom plows that look to be in nice shape. They have the guide wheel on them like the ones discussed on here not too long ago. I had never seen that before and now I end up with a set; funny how things work out some times. I may be looking to sell the plows.

Sponsored Links