| Author |
 Topic Search  Topic Options
|
Chuck(ONT) 
Orange Level
Joined: 11 Sep 2009
Location: Ontario
Points: 1055
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Need seal #
Posted: 02 Aug 2011 at 12:54pm |
|
Need seal no. for Allis C, goes on the tranny bearing carrier that the final drive shaft slides into. Old one looks like CR 800351, but can't find it anywhere, may not be right no.
|
|
Never take life too seriously.
Nobody gets out alive anyway!
1C 1 WD45 1 AC180
|
 |
|
Sponsored Links
|
|
|
Dick L
Orange Level
Joined: 12 Sep 2009
Location: Edon Ohio
Points: 5087
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Aug 2011 at 1:33pm |
|
You might get seals from Sandy Lake Implement without giving them numbers. I think it would be a lip seal. I have not heard of anyone making the leather seals.
|
|
DonDittmar
Orange Level
Joined: 15 Sep 2009
Location: MIllersburg, MI
Points: 2516
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Aug 2011 at 2:01pm |
Dick has a point, although in talking with my SKF(owns chicago rawhide) rep, SKF does still make some leather seals. There are some applications in which leather provides the best seal
|
|
Experience is a fancy name for past mistakes. "Great moments are born from great opportunity"
1968 D15D,1962 D19D
Also 1965 Cub Loboy and 1958 JD 720 Diesel Pony Start
|
|
Chuck(ONT)
Orange Level
Joined: 11 Sep 2009
Location: Ontario
Points: 1055
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Aug 2011 at 2:36pm |
|
Thanks, will check with Sandy Lake. This didn't cross with SKF, thought I might have wrong no.
|
|
Never take life too seriously.
Nobody gets out alive anyway!
1C 1 WD45 1 AC180
|
|
Gerald J.
Orange Level
Joined: 12 Sep 2009
Location: Hamilton Co, IA
Points: 5636
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Aug 2011 at 4:32pm |
|
Baum Hydraulics www.baumhydraulics.com has a good listing of seals by CR and National in section R of their catalog that you can download. I didn't find any very close to your numbers but they list them by number and by size and type.
Gerald J.
|
|
GregLawlerMinn
Orange Level
Joined: 11 Sep 2009
Location: Lawler, Mn
Points: 1226
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Aug 2011 at 6:58pm |
Chuck Sounds like you need the inner pinion shaft seal. Have tried "aftermarket" (auto store) cross referenced ones and found out they are pretty susceptable to damage when installing the final. Have had good luck with the AGCO ones (like SLI will provide).
|
|
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC
|
|
Chuck(ONT)
Orange Level
Joined: 11 Sep 2009
Location: Ontario
Points: 1055
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Aug 2011 at 7:33pm |
|
Thanks again, will check with SLI.
|
|
Never take life too seriously.
Nobody gets out alive anyway!
1C 1 WD45 1 AC180
|
|
norm[ind]
Orange Level
Joined: 29 Oct 2010
Location: bourbon,ind
Points: 2992
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Aug 2011 at 7:57pm |
|
that number has been supereseded like a lot of nubers are looking forhappens all the time sorr y boys for the info.
|
|
Dave(inMA)
Orange Level
Joined: 12 Sep 2009
Location: Grafton, MA
Points: 2399
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Aug 2011 at 9:01pm |
|
You can take measurements (all dimensions) and call your favorite bearing and seal source. I've done that several times and have been able to find what I need.
|
|
WC, CA, D14, WD45
|
|
WD45
Orange Level
Joined: 20 Sep 2009
Location: STAYNER,ONTARIO
Points: 957
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Aug 2011 at 9:07pm |
|
Chuck - give Keith at Maple Lane Farm Equipment a call 519 323 4289
|
|
Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H
|
|
