| Author |
 Topic Search  Topic Options
|
allis1984 
Bronze Level
Joined: 04 Feb 2011
Points: 97
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 7030 wont move
Posted: 04 Feb 2011 at 2:59pm |
|
our 7030 wont move. pressure light stays on. Any ideas its go oil in. worked fine yesterday. Thanks
|
 |
|
Sponsored Links
|
|
|
skipwelte
Orange Level
Joined: 29 Oct 2009
Location: Anthon, Iowa
Points: 723
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2011 at 4:23pm |
|
Does the steering work?? If the steering doesnt work Id say the center went out of the torque limited, you might hear a rattle at the center of the tractor. If steering does work, check the oil level in the trans, dipstick under the seat, if its got oil, the let the clutch pedal out in gear and push the high button on the floor down, if it goes into high then low is bad. the pressure lite is telling you there might not be enough pressure to run the trans, very few times does the trans pump go bad, it usually somthing esle. If it wont go in low, wont go in high, steers ok it may be the clutch hub splines bad on the input shaft, but the pressure lite shouldnt be on. HTH
|
|
allis1984
Bronze Level
Joined: 04 Feb 2011
Points: 97
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2011 at 4:34pm |
|
ya steers fine. No high low. no gear clash if i try to shift with clutch engaged. So im stumped
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21048
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2011 at 5:06pm |
|
Splines are gone/stripped on the low range PD clutch housing.
|
|
allis1984
Bronze Level
Joined: 04 Feb 2011
Points: 97
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2011 at 5:15pm |
with the splines striped wouldnt it build pressure or not?
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21048
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2011 at 5:29pm |
|
Hydraulically the clutch is engaged when the pedal is up.....only thing is the clutch isn't turning because the splines are gone. I'm not there but, if your steering works and you can't grind any gears with the clutch pedal up, that's what it is.
|
|
bena18
Bronze Level
Joined: 30 Nov 2010
Location: sw mo
Points: 49
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2011 at 5:40pm |
|
Might check suction screen on gerotor pump
|
|
allis1984
Bronze Level
Joined: 04 Feb 2011
Points: 97
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2011 at 7:37pm |
|
ya thats what i was thinking if the screen i plugged. I know the splines arent striped out
|
|
