| Author |
 Topic Search  Topic Options
|
TedN 
Bronze Level
Joined: 30 Apr 2025
Location: Central WA
Points: 179
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 190XT front weights
Posted: Yesterday at 11:59am |
I looked at a 190XT yesterday that has suitcase weights on the front. I think it is the first time I have seen them on a 190XT. Was it an option, is it aftermarket, or were they available on a later tracyor and someone has put them on this? I didn't get great pictures of the mount, but it looks like it was made for the tractor. The serial number is in the early 11000 range in case anyone wants to know.   Ted
|
|
190XTD seriesIII, 190XTD seriesI, maroon belly 7000, 7045, 190XTD series??? project(or maybe parts)
|
 |
|
Sponsored Links
|
|
|
Leon B MO
Orange Level
Joined: 12 Sep 2009
Location: Old Monroe, Mo
Points: 2235
|
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 12:45pm |
|
"Looks" like the bracket and weights from a 200. The bracket would bolt right on the XT
Leon B Mo
|
|
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
|
calico190xt68
Orange Level
Joined: 12 Jan 2017
Location: Frankton, IN
Points: 907
|
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 1:28pm |
|
What is that powercrater engine decal all about on the grill? Nice looking grill too.
|
|
80 7010, 80 7020, 68 190XTD, 67 190XTD, 500 Loader, AC 2000 Plow, Member Indiana A-C Partners, Member TAC
|
|
TedN
Bronze Level
Joined: 30 Apr 2025
Location: Central WA
Points: 179
|
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 2:51pm |
|
I noticed the power crater sticker. Owner wasn't home so I didn't hear it run or drive it. It looks clean and straight, obviously been repainted. Has series III stickers on it too, so maybe the owner just bought a bunch of Allis stickers. My brother is thinking about getting it, if we look at it again we'll probably take a trailer in case it runs okay and stays in gear. It also has pie weights. All the weight along with 18.4-38 rears(and duals) makes me a little nervous about the running gear but maybe it has been updated.
Ted
|
|
190XTD seriesIII, 190XTD seriesI, maroon belly 7000, 7045, 190XTD series??? project(or maybe parts)
|
|
Leon B MO
Orange Level
Joined: 12 Sep 2009
Location: Old Monroe, Mo
Points: 2235
|
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 4:19pm |
|
Is it a gasser? If yes, that may explain the power-crator sticker. The grill, rear pie weights, front weights and 38 duals are worth quite a bit. 11xxx sn makes it a 1966, like me. Can't see much from pics but if the rest of the tractor is as clean as what I see, it would be hard to pass up if the price is right.
Leon B Mo
|
|
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
|
TedN
Bronze Level
Joined: 30 Apr 2025
Location: Central WA
Points: 179
|
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 5:27pm |
|
It is a diesel, it is clean. I can see a few spots that have had some oil buildup, mainly hydraulic pump and couplers. Probably nothing major on the pump, and needs to have the 60 year old couplers replaced. It looks like whoever did the front weights wanted it to look nice, so probably anything else that was done is going to be correct. Funny thing about the 38s, if we get this one it will be three of them with 38s.
If we get it I will get some better pictures up.
Ted
Edited by TedN - Yesterday at 5:28pm
|
|
190XTD seriesIII, 190XTD seriesI, maroon belly 7000, 7045, 190XTD series??? project(or maybe parts)
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 5488
|
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 8:30pm |
|
See how it steers, should be able to turn the steering wheel with one finger. Take it for a drive, 3rd gear, lock the left brake and turn the wheel hard left first in low range a full circle then switch to high range. Do the same to the right. If it surges as it turns then that’s a possible problem in the pump if all fluid levels are full. This also test the brakes. This is how I figured out that I had pump issues and it required a full rebuild. Verified later with gauges but this is good field test. I do like the front weight set up.
Edited by AC720Man - Yesterday at 8:33pm
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
IBWD MIke
Orange Level
Joined: 08 Apr 2012
Location: Newton Ia.
Points: 4285
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 hours 13 minutes ago at 6:33am |
|
You better get that thing bought before it gets away.....
Edited by IBWD MIke - 15 hours 13 minutes ago at 6:33am
|
|
Brian F(IL)
Orange Level Access
Joined: 14 Sep 2009
Location: Paxton, IL
Points: 2735
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 hours 46 minutes ago at 10:00am |
|
I don't think suitcase weights were an option for any One-Ninety's or XT's. As Leon said, probably from a 200.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 22848
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 hours 34 minutes ago at 10:12am |
|
In that 1972 year range and newer, the 200-210-220's all had those 65 lbs suitcase weights available.
|
|
Leon B MO
Orange Level
Joined: 12 Sep 2009
Location: Old Monroe, Mo
Points: 2235
|
Post Options
Thanks(0)
Quote Reply
Posted: 8 hours 51 minutes ago at 12:55pm |
|
If the bracket is from a 200, it will have 6 or so square holes behind the weights to put the locks in for various numbers of weights. There's to many weights on there now to use locks. They look similar to the locks on a 70xx. 200's also offered a different bracket that accepted the 175-185 style weights. We had 2 200's, one with each style.
Leon B Mo
|
|
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 22848
|
Post Options
Thanks(0)
Quote Reply
Posted: 3 hours 60 minutes ago at 5:46pm |
|
I count 12 of those 65 lb weights. I see no pinch clamps to hold them on. So, they will surely fall off at some point.
|
|
plummerscarin
Orange Level Access
Joined: 22 Jun 2015
Location: ia
Points: 4189
|
Post Options
Thanks(0)
Quote Reply
Posted: 3 hours 29 minutes ago at 6:17pm |
|
Aren't they for a 7XXX?
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 22848
|
Post Options
Thanks(0)
Quote Reply
Posted: 2 hours 22 minutes ago at 7:24pm |
|
I thought the pinch clamps would interchange between hundred series and 7000 series, but they are a different p/n. The weights are different. Hundred series and their brackets hang square to the ground. 7000 series are at an angle. 65 lbs and 62 lbs are the weight.
|
|
TedN
Bronze Level
Joined: 30 Apr 2025
Location: Central WA
Points: 179
|
Post Options
Thanks(0)
Quote Reply
Posted: 2 hours 14 minutes ago at 7:32pm |
|
I don't think they would fit my 7000, the weight bracket on it is angled. This one is vertical. Not sure if all 70xx have the angled bracket. I get the feeling this tractor may have been used for pulling at some point in time, but I can't see where anything has been done for weight reduction so maybe not. It is on a small hay farm, so anything it would have done recently wouldn't require traction. We are trying to go take another look at it early next week.
Edit - I guess I type too slow
Ted
Edited by TedN - 2 hours 11 minutes ago at 7:35pm
|
|
190XTD seriesIII, 190XTD seriesI, maroon belly 7000, 7045, 190XTD series??? project(or maybe parts)
|
|
randy
Orange Level
Joined: 12 Sep 2009
Location: Illinois
Points: 1261
|
Post Options
Thanks(0)
Quote Reply
Posted: 1 hour 22 minutes ago at 8:24pm |
|
I have the same weights on my 180
|
|
CA WD WD45 D17 D17 Diesel 7060 8050 8070
|
|
