Series 3 flexhead question

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Working on adapting a 313 flexhead to a K2.  Got the head mounted and good to go with that side of things.  

My question is, what voltage is seen at the header height 3 spring system on the head?

I think my plan is to build a system from the ground up for it, utilizing what is currently on the head.  So, I want to verify what voltage the head itself is made for.  I am not going to make it for low, medium and high.  Probably just the medium setting.

So I’m not going to use a header height module from a different combine, which is why I don’t know if they run a lower voltage through the header side of things.

Any thoughts would be appreciated.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
67-d10 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 19 Nov 2022 Location: NESD Points: 41	Post Options Post Reply Quote 67-d10 Report Post Thanks(0) Quote Reply Topic: Series 3 flexhead question Posted: 1 hour 39 minutes ago at 12:41pm
	Working on adapting a 313 flexhead to a K2. Got the head mounted and good to go with that side of things. My question is, what voltage is seen at the header height 3 spring system on the head? I think my plan is to build a system from the ground up for it, utilizing what is currently on the head. So, I want to verify what voltage the head itself is made for. I am not going to make it for low, medium and high. Probably just the medium setting. So I’m not going to use a header height module from a different combine, which is why I don’t know if they run a lower voltage through the header side of things. Any thoughts would be appreciated.

Sponsored Links