![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Badlands winch controller |
Post Reply ![]() |
Author | |
desertjoe ![]() Orange Level Access ![]() ![]() Joined: 23 Sep 2013 Location: New mexico Points: 13729 |
![]() ![]() ![]() ![]() ![]() Posted: 01 Oct 2025 at 10:44pm |
I'm hoping to get some info on how to get past this issue,,,, I have a Badlands ZRX 9000 winch I bought at Harbor Freight about a year ago and have only used it twice and worked great both times. I recently had a use for it and I'm thinking the neighborhood dog snuck into my garage and chewed up the wire on the controller,,,then carried off all the pieces to remove the evidence,,,,,, ![]() ![]() Actually,,,I just flat do not where I might of stashed the frigging thing where even I could not find it to use it,,,,!! I'm thinkin "The younger I get,,,,The more I remember,,,,!!! Having only been used twice in it's life,,,it still looks like a brand new machine as I built a hinged metal cover mostly to keep them dang neighbor hood dogs away from it,,,,, I called HF customer service and they tell me that HF does not stock a replacement controller for this machine,,,,!!! Ain't that a beech,,,?? The female port for the controller has 5 pins and one center pin, I'm hoping these GURUs here could come up with a suggestion to replace the original 5 pin female port with an alternate one that has a male 5 pin available on a "generic controller,",,,???? |
|
![]() |
|
Sponsored Links | |
![]() |
|
PaulB ![]() Orange Level ![]() Joined: 12 Sep 2009 Location: Rocky Ridge Md Points: 5142 |
![]() ![]() ![]() ![]() ![]() |
Most likely a quality (not Chinese) winch would have an available replacement controller.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
|
![]() |
|
fjdrill ![]() Silver Level Access ![]() Joined: 13 May 2012 Location: Alabama Points: 389 |
![]() ![]() ![]() ![]() ![]() |
You can get a wireless remote on ebay for like $70.00.
|
|
![]() |
|
Hubert (Ga)engine7 ![]() Orange Level ![]() ![]() Joined: 12 Sep 2009 Location: Jackson Cnty,GA Points: 6487 |
![]() ![]() ![]() ![]() ![]() |
HF has wireless remotes available so that might be your best option.
|
|
Just an old country boy saved by the grace of God.
|
|
![]() |
|
jaybmiller ![]() Orange Level Access ![]() Joined: 12 Sep 2009 Location: Greensville,Ont Points: 24727 |
![]() ![]() ![]() ![]() ![]() |
Hay DJ bypass HF go to the Badlands ! Tell them about the neighbour's dog LOVING his new toy...and you might get a discount on YOUR new remote. Jay
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
![]() |
|
Hubert (Ga)engine7 ![]() Orange Level ![]() ![]() Joined: 12 Sep 2009 Location: Jackson Cnty,GA Points: 6487 |
![]() ![]() ![]() ![]() ![]() |
Check this one out: https://www.harborfreight.com/wireless-winch-remote-56504.html
|
|
Just an old country boy saved by the grace of God.
|
|
![]() |
|
Walker ![]() Orange Level Access ![]() ![]() Joined: 12 Sep 2009 Location: oh Points: 8958 |
![]() ![]() ![]() ![]() ![]() |
Tell em they weren't Badlands till their winch got there.
|
|
![]() |
|
Tbone95 ![]() Orange Level Access ![]() ![]() Joined: 31 Aug 2012 Location: Michigan Points: 12225 |
![]() ![]() ![]() ![]() ![]() |
|
|
![]() |
|
WF owner ![]() Orange Level ![]() Joined: 12 May 2013 Location: Bombay NY Points: 5035 |
![]() ![]() ![]() ![]() ![]() |
I have one of the wireless remotes (like the one Hubert (Ga)engine7 posted a link for above). I love it.
My gooseneck trailer is 33' long (28' plus 5' beavertail). I can sit on a tractor and control the winch while steering the tractor.
|
|
![]() |
|
desertjoe ![]() Orange Level Access ![]() ![]() Joined: 23 Sep 2013 Location: New mexico Points: 13729 |
![]() ![]() ![]() ![]() ![]() |
Well,,I ain't got nowhere with my missing winch controller,,,SO,,,im gonna have to place blame on the shifty lo0oking fellar down the street,,,,he sure looks like he would be the type of person that would carry off winch controllers just to agitate honest and law abiding folks,,,,, ![]() I finally got a number for HarborFreightcustomerservice.com and even tho my winch is only a couple of years old,,HF does NOT have replacement controllers for this 2 year old model!! My winch has 5 pins in the connector and the current HF winch controller has 3 pins. I did not see any wireless controllers on Ebay that worked with the 5 pin port,,,,???
|
|
![]() |
|
desertjoe ![]() Orange Level Access ![]() ![]() Joined: 23 Sep 2013 Location: New mexico Points: 13729 |
![]() ![]() ![]() ![]() ![]() |
Hey Hubert and WF,,,how many pins do ya'lls controller port have,,,??
|
|
![]() |
|
Hubert (Ga)engine7 ![]() Orange Level ![]() ![]() Joined: 12 Sep 2009 Location: Jackson Cnty,GA Points: 6487 |
![]() ![]() ![]() ![]() ![]() |
Mine are 5 pin. I still have the original controller for my 6,000 lb winch which is 14 years old. The one HF has is 5 pin also and can be used wired or wireless.
Just an unrelated side noteā¦..One problem I have had with a couple of the smaller winches is corrosion in the wiring from the control box to the motor. I would have 12 volts showing at the motor but the wires would not let enough amps go through.
|
|
Just an old country boy saved by the grace of God.
|
|
![]() |
|
Jgranat ![]() Bronze Level ![]() Joined: 25 Mar 2019 Location: NW PA Points: 131 |
![]() ![]() ![]() ![]() ![]() |
I fixed the neighbors 12k Badlands winch last year that had a terrible corrosion issue on the main supply line. I tore into the little black control box and found it wasn't getting power. The wiring in there was pretty simple. If you can't get a replacement any 2 button control should be easy to wire in I would say. Not your first choice I understand, but to be back up and running it may be an option.
The neighbor lets me borrow his trailer to haul treasures home, he keeps the power cable and remote in a small tote that is easy to keep track of, and also not easy for the local K9's to drag away. |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |