![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
CA Carburetor "Upgrade" Options |
Post Reply ![]() |
Author | |
dfwallis ![]() Orange Level ![]() Joined: 09 Mar 2023 Location: DFW Points: 647 |
![]() ![]() ![]() ![]() ![]() Posted: 5 hours 24 minutes ago at 12:56pm |
My 1952 CA has a TSX486 Type A/Fixed Jet carburetor. I put a new kit in it, but the kit doesn't come with a new venturi which is just a bit eaten around the edges. I've not been able to get it to stop missing randomly (at high RPM it misses slightly less). Initially, it ran best with the idle screw adjusted all the way in. I took everything apart and ensured clear jets. I found the idle screw damaged very slightly from over-tightening and smoothed it out with some sandpaper (thought it was new and I'm sure I never over-tightened it, but then I haven't found the original if it was new with the saved parts). This resulted in very slightly better performance and allowed me to back the screw out just a bit, but not much overall difference in behavior.
I suspect a venturi leak may be causing it to slurp some extra liquid fuel in every now and then. I'll consider sending it out in the future for a full rebuild, but in the mean time I wanted to investigate if there are any "upgrade" (e.g. performance, reliability) options.
I see these 2 Zeniths at DJs but I don't see enough information to differentiate the reason for a significant price disparity (I've enquired via email). I assume the second one is the same one that Steiners has as a "universal" replacement. SKU: 1603-0002 SKU: AB-223D https://stores.djstractorparts.com/carburetor-zenith-allis-chalmers-b-ib-c-ca-d10-d12-wc-wd-wf-carb/ Edited by dfwallis - 5 hours 10 minutes ago at 1:10pm |
|
1952 CA13092
|
|
![]() |
|
Sponsored Links | |
![]() |
|
steve(ill) ![]() Orange Level Access ![]() ![]() Joined: 11 Sep 2009 Location: illinois Points: 85418 |
![]() ![]() ![]() ![]() ![]() |
One says ZENITH and the other says ZENITH STYLE..... Could be a China Knockoff..
I know you can buy Chineese knockoff of the MS carb "style" for under $50.
|
|
Like them all, but love the "B"s.
|
|
![]() |
|
dfwallis ![]() Orange Level ![]() Joined: 09 Mar 2023 Location: DFW Points: 647 |
![]() ![]() ![]() ![]() ![]() |
I found a source for a machined venturi replacement. I may try that first.
|
|
1952 CA13092
|
|
![]() |
|
dfwallis ![]() Orange Level ![]() Joined: 09 Mar 2023 Location: DFW Points: 647 |
![]() ![]() ![]() ![]() ![]() |
I find sources also that indicate TSX670 on a CA (with TSX670 also interchangeable with TSX701, TSX815 and TSX844 but not enough info to prove it).
|
|
1952 CA13092
|
|
![]() |
|
jvin248 ![]() Silver Level ![]() ![]() Joined: 17 Jan 2022 Location: Detroit Points: 419 |
![]() ![]() ![]() ![]() ![]() |
. Uncle Tony's Garage channel on YouTube the other day had an episode on stumbling/missing points style engines. Your problem seems like what he said was an old school problem: chasing fuel, plugs, points, condenser... When the real problem is a worn distributor shaft. Fix was to tighten the points gap to compensate, or replace the distributor shaft and bushings. .
|
|
![]() |
|
dfwallis ![]() Orange Level ![]() Joined: 09 Mar 2023 Location: DFW Points: 647 |
![]() ![]() ![]() ![]() ![]() |
Looks like the following MS carbs were on CAs (with Zenith replacement) 1952-1956 Tractor CA Allis 225679 TSX486 Zenith: 12522 1952-1956 Tractor CA Allis 225090 TSX470 Zenith: 12522 -1957 Tractor CA Allis 228623 TSX670 Zenith: 12566 Tractor CA Allis 228624 TSX701 Zenith: 12566 -1956 Tractor CA Allis 234228 TSX815 Zenith: 12566 |
|
1952 CA13092
|
|
![]() |
|
dfwallis ![]() Orange Level ![]() Joined: 09 Mar 2023 Location: DFW Points: 647 |
![]() ![]() ![]() ![]() ![]() |
Very possible, it has been in the back of my mind. But I do know the carb has issues. It's running a bit too rich. It starts really good though. Barely has to turn over at all and fires right up. My brother said it fires before it even rotates :)
|
|
1952 CA13092
|
|
![]() |
|
jvin248 ![]() Silver Level ![]() ![]() Joined: 17 Jan 2022 Location: Detroit Points: 419 |
![]() ![]() ![]() ![]() ![]() |
. I bought a harbor freight mini ultra sonic cleaner ($80) and put several carbs through it. Really helps. Dawn dish soap and green/purple cleaner and hot water. Better than a rebuild kit. Split the carb and put split side down. A little basket from an office desk set for small bits. All fits. .
|
|
![]() |
|
dfwallis ![]() Orange Level ![]() Joined: 09 Mar 2023 Location: DFW Points: 647 |
![]() ![]() ![]() ![]() ![]() |
US cleaner is no match for the chemical concoction and mechanical scrubbing and passageway cleaning I used. There's not a spec of rust or other coating. Replaceable Jets were replaced with new. The venturi on the other hand is made out of zinc and portions of it look like swiss cheese. It is likely that it at the very least is not sealing well. A venturi wasn't provided in any of the kits I could find, but I just found one online and I'll install it in May on my next trip. A damaged venturi can definitely cause erratic firing due to inconsistent mixture, but it may have more than one cause. We shall see. We inspected the distributor when we reassembled and didn't notice any unusual play, but will consider that next.
|
|
1952 CA13092
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |