Allis B starting

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi all,
Quick update, I have installed a starter motor, put a six volt solenoid on it  and a stud so I now use a push button to start instead of that horrible mechanical switch. I’ve had the magneto rebuilt. The carb was put on new by the previous owner.
I’ve only managed to start  her once since the rebuilt magneto was put on and the timing checked. 
I thought I’d take the carb off and clean it out, when I did the two inch pipe from the air filter was full of petrol. Surely that’s not right and what would be causing it ?
Any other advice on starting issues would be greatly appreciated 
Thanks 

Edited by Brinky - 5 hours 41 minutes ago at 8:42am

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Brinky Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 30 Aug 2024 Location: Uk Points: 17	Post Options Post Reply Quote Brinky Report Post Thanks(0) Quote Reply Topic: Allis B starting Posted: 5 hours 42 minutes ago at 8:41am
	Hi all, Quick update, I have installed a starter motor, put a six volt solenoid on it and a stud so I now use a push button to start instead of that horrible mechanical switch. I’ve had the magneto rebuilt. The carb was put on new by the previous owner. I’ve only managed to start her once since the rebuilt magneto was put on and the timing checked. I thought I’d take the carb off and clean it out, when I did the two inch pipe from the air filter was full of petrol. Surely that’s not right and what would be causing it ? Any other advice on starting issues would be greatly appreciated Thanks Edited by Brinky - 5 hours 41 minutes ago at 8:42am

Sponsored Links

steve(ill) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 85418	Post Options Post Reply Quote steve(ill) Report Post Thanks(0) Quote Reply Posted: 5 hours 36 minutes ago at 8:47am
	if the FLOAT sticks in the carb, or the NEEDLE VALVE does not seat properly, then the bowl will OVERFLOW and run into the tube from the air cleaner.
	Like them all, but love the "B"s.

Les Kerf Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 08 May 2020 Location: Idaho Points: 1039	Post Options Post Reply Quote Les Kerf Report Post Thanks(0) Quote Reply Posted: 3 hours 44 minutes ago at 10:39am
	As Steve noted above, the float/needle obviously is leaking. Once that is fixed, my Model C much prefers having the throttle opened only about one or two notches above minimum idle setting.