This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Wd stuck exhaust valves |
Post Reply |
Author | |
ToddnwIl
Silver Level Joined: 07 May 2013 Location: Illinois Points: 289 |
Post Options
Thanks(0)
Posted: 09 Feb 2025 at 5:00pm |
I've recently inherited a wd that used to run. Prolly bin 10 years or so. Got it turning over well and the carb cleaned. Still couldn't get it to run. Today I did a compression test. No compression on the middle two cylinders. So I pulled the valve cover and the exhaust valves are stuck open. Any old school tricks to loosen them without pulling the head.
|
|
Sponsored Links | |
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20984 |
Post Options
Thanks(0)
|
Lots of penetrating oil from the top side. Get about 10 ft of nylon rope small enough in diameter to shove down inside the spark plug hole (5/16" ?) while the piston is at BDC. Have a knot tied in the rope so you don't lose it. Turn engine over by hand with all that rope coiled up inside. Rinse and repeat for the second cylinder.
|
|
ToddnwIl
Silver Level Joined: 07 May 2013 Location: Illinois Points: 289 |
Post Options
Thanks(0)
|
Awsome idea!!! I'll give that ago. I knew their had to be an old school trick!!!
|
|
Clay
Orange Level Joined: 11 Sep 2009 Location: Udall, Kansas Points: 9523 |
Post Options
Thanks(0)
|
KROIL will help free them up. KREEN is even better than KROIL for stuck rings and valves.
KREEN is made by KANO Laboratories, Nashville, Tn. |
|
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 83161 |
Post Options
Thanks(0)
|
besides the penetrant, tapping on the end of the valve can help SHOCK it.
|
|
Like them all, but love the "B"s.
|
|
HudCo
Orange Level Joined: 29 Jan 2013 Location: Plymouth Utah Points: 3664 |
Post Options
Thanks(0)
|
take the rocker shaft off and start tapping on the valves with a plastic or rubber hammer besides you will need to make sure allof them move smooth. and you will need to replace the push rods that got bent when you got it to roll over
|
|
SteveM C/IL
Orange Level Access Joined: 12 Sep 2009 Location: Shelbyville IL Points: 8367 |
Post Options
Thanks(1)
|
tap the stem not the retainer
|
|
ToddnwIl
Silver Level Joined: 07 May 2013 Location: Illinois Points: 289 |
Post Options
Thanks(0)
|
Alittle update. The rope trick worked perfectly! We soaked them down really well. 20250210_180357.jpg20250210_180909.jpg
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |